Changeset 5596

Timestamp:

Aug 1, 2008, 4:48:58 PM (16 years ago)

Author:

duncan

Message:

Checking in the scenario with 'old' x locations. Slope is not taken into account

File:

• anuga_work/development/Hinwood_2008/scenarios.py (modified) (8 diffs)

anuga_work/development/Hinwood_2008/scenarios.py

@@ -22 +22 @@
         'scenario_id':'T1R3',
         'gauge_names':['B','1','2','3','4','5','7'],
-        'gauge_x':[-0.68, 1.569, 2.568, 3.566, 4.564, 5.562, 7.559],
+        'gauge_x':[-0.68, 1.572, 2.572, 3.572, 4.572, 5.572, 7.572],
         'gauge_bed_elevation':[-0.400000, -0.293158,
                                -0.234473, -0.175788, -0.117104,
@@ -48 +48 @@
         'scenario_id':'T1R5',
         'gauge_names':['B','1','2','3','4','5','7'],
-        'gauge_x':[-0.68, 1.569, 2.568, 3.566, 4.564, 5.562, 7.559],
+        'gauge_x':[-0.68, 1.572, 2.572, 3.572, 4.572, 5.572, 7.572],
         'gauge_bed_elevation':[-0.400000, -0.293158,
                                -0.234473, -0.175788, -0.117104,
@@ -77 +77 @@
         'scenario_id':'T2R7',
         'gauge_names':['B','1','2','3','4','5'],
-        'gauge_x':[-0.68, 1.569, 2.568, 3.566, 4.564, 5.562],
+        'gauge_x':[-0.68, 1.572, 2.572, 3.572, 4.572, 5.572],
         'gauge_bed_elevation':[-0.400000, -0.293158,
                                -0.234473, -0.175788, -0.117104,
@@ -103 +103 @@
         'scenario_id':'T2R8',
         'gauge_names':['B','1','2','3','4','5','7'],
-        'gauge_x':[-0.68, 1.569, 2.568, 3.566, 4.564, 5.562, 7.559],
+        'gauge_x':[-0.68, 1.572, 2.572, 3.572, 4.572, 5.572, 7.572],
         'gauge_bed_elevation':[-0.400000, -0.293158,
                                -0.234473, -0.175788, -0.117104,
@@ -131 +131 @@
         'gauge_names':['B','1','2','3','5','7','8',
                        '9','10','11','12'],
-
-        'gauge_x':[-0.325, 1.572, 2.571, 3.571, 5.57,
-                   7.57, 8.57, 9.569, 10.569, 11.569,
-                   12.569],
-
+        'gauge_x':[-0.325, 1.572, 2.572, 3.572, 5.572,
+                   7.572, 8.572, 9.572, 10.572, 11.572,
+                   12.572],
         # remove 
         'gauge_bed_elevation':[-0.336000, -0.237263, -0.213789, -0.190315,
@@ -164 +162 @@
         'gauge_names':['B','1','2','3','5','7','8',
                        '9','10','11','12'],
-        
-        'gauge_x':[-0.325, 1.572, 2.571, 3.571, 5.57,
-                   7.57, 8.57, 9.569, 10.569, 11.569,
-                   12.569],
+        'gauge_x':[-0.325, 1.572, 2.572, 3.572, 5.572,
+                   7.572, 8.572, 9.572, 10.572, 11.572,
+                   12.572],
         # remove 
         'gauge_bed_elevation':[-0.336000, -0.237263, -0.213789, -0.190315,
@@ -196 +193 @@
         'gauge_names':['B','1','2','3','5','7','8',
                        '9','10','11','12'],
-        
-        'gauge_x':[-0.325, 1.572, 2.571, 3.571, 5.57,
-                   7.57, 8.57, 9.569, 10.569, 11.569,
-                   12.569],
+        'gauge_x':[-0.325, 1.572, 2.572, 3.572, 5.572,
+                   7.572, 8.572, 9.572, 10.572, 11.572,
+                   12.572],
         # remove 
         'gauge_bed_elevation':[-0.336000, -0.237263, -0.213789, -0.190315,
@@ -227 +223 @@
         'gauge_names':['B','1','2','3','5','7','8',
                        '9','10','11','12'],
-        
-        'gauge_x':[-0.325, 1.572, 2.571, 3.571, 5.57,
-                   7.57, 8.57, 9.569, 10.569, 11.569,
-                   12.569],
+        'gauge_x':[-0.325, 1.572, 2.572, 3.572, 5.572,
+                   7.572, 8.572, 9.572, 10.572, 11.572,
+                   12.572],
         # remove 
         'gauge_bed_elevation':[-0.336000, -0.237263, -0.213789, -0.190315,