Ticket #168: ticket168_point_in_grid.ps

%!PS-Adobe-3.0 EPSF-3.0
%%Creator: Tk Canvas Widget
%%Title: Window .17405352.17438520.17475344.17475504.17475464
%%CreationDate: Wed May 30 17:13:42 2007
%%BoundingBox: -210 102 823 690
%%Pages: 1
%%DocumentData: Clean7Bit
%%Orientation: Portrait
%%EndComments

%%BeginProlog
/CurrentEncoding [
/space/space/space/space/space/space/space/space
/space/space/space/space/space/space/space/space
/space/space/space/space/space/space/space/space
/space/space/space/space/space/space/space/space
/space/exclam/quotedbl/numbersign/dollar/percent/ampersand/quotesingle
/parenleft/parenright/asterisk/plus/comma/hyphen/period/slash
/zero/one/two/three/four/five/six/seven
/eight/nine/colon/semicolon/less/equal/greater/question
/at/A/B/C/D/E/F/G
/H/I/J/K/L/M/N/O
/P/Q/R/S/T/U/V/W
/X/Y/Z/bracketleft/backslash/bracketright/asciicircum/underscore
/grave/a/b/c/d/e/f/g
/h/i/j/k/l/m/n/o
/p/q/r/s/t/u/v/w
/x/y/z/braceleft/bar/braceright/asciitilde/space
/Euro/space/quotesinglbase/florin/quotedblbase/ellipsis/dagger/daggerdbl
/circumflex/perthousand/Scaron/guilsinglleft/OE/space/Zcaron/space
/space/quoteleft/quoteright/quotedblleft/quotedblright/bullet/endash/emdash
/tilde/trademark/scaron/guilsinglright/oe/space/zcaron/Ydieresis
/space/exclamdown/cent/sterling/currency/yen/brokenbar/section
/dieresis/copyright/ordfeminine/guillemotleft/logicalnot/hyphen/registered/macron
/degree/plusminus/twosuperior/threesuperior/acute/mu/paragraph/periodcentered
/cedilla/onesuperior/ordmasculine/guillemotright/onequarter/onehalf/threequarters/questiondown
/Agrave/Aacute/Acircumflex/Atilde/Adieresis/Aring/AE/Ccedilla
/Egrave/Eacute/Ecircumflex/Edieresis/Igrave/Iacute/Icircumflex/Idieresis
/Eth/Ntilde/Ograve/Oacute/Ocircumflex/Otilde/Odieresis/multiply
/Oslash/Ugrave/Uacute/Ucircumflex/Udieresis/Yacute/Thorn/germandbls
/agrave/aacute/acircumflex/atilde/adieresis/aring/ae/ccedilla
/egrave/eacute/ecircumflex/edieresis/igrave/iacute/icircumflex/idieresis
/eth/ntilde/ograve/oacute/ocircumflex/otilde/odieresis/divide
/oslash/ugrave/uacute/ucircumflex/udieresis/yacute/thorn/ydieresis
] def

50 dict begin
% This is a standard prolog for Postscript generated by Tk's canvas
% widget.
% RCS: @(#) $Id: mkpsenc.tcl,v 1.3 2002/07/19 14:37:21 drh Exp $

% The definitions below just define all of the variables used in
% any of the procedures here.  This is needed for obscure reasons
% explained on p. 716 of the Postscript manual (Section H.2.7,
% "Initializing Variables," in the section on Encapsulated Postscript).

/baseline 0 def
/stipimage 0 def
/height 0 def
/justify 0 def
/lineLength 0 def
/spacing 0 def
/stipple 0 def
/strings 0 def
/xoffset 0 def
/yoffset 0 def
/tmpstip null def


/cstringshow {
    {
        dup type /stringtype eq
        { show } { glyphshow }
        ifelse
    }
    forall
} bind def



/cstringwidth {
    0 exch 0 exch
    {
        dup type /stringtype eq
        { stringwidth } { 
            currentfont /Encoding get exch 1 exch put (\001) stringwidth 
        }
        ifelse 
        exch 3 1 roll add 3 1 roll add exch
    }
    forall
} bind def

% font ISOEncode font
% This procedure changes the encoding of a font from the default
% Postscript encoding to current system encoding.  It's typically invoked just
% before invoking "setfont".  The body of this procedure comes from
% Section 5.6.1 of the Postscript book.

/ISOEncode {
    dup length dict begin
        {1 index /FID ne {def} {pop pop} ifelse} forall
        /Encoding CurrentEncoding def
        currentdict
    end

    % I'm not sure why it's necessary to use "definefont" on this new
    % font, but it seems to be important; just use the name "Temporary"
    % for the font.

    /Temporary exch definefont
} bind def

% StrokeClip
%
% This procedure converts the current path into a clip area under
% the assumption of stroking.  It's a bit tricky because some Postscript
% interpreters get errors during strokepath for dashed lines.  If
% this happens then turn off dashes and try again.

/StrokeClip {
    {strokepath} stopped {
        (This Postscript printer gets limitcheck overflows when) =
        (stippling dashed lines;  lines will be printed solid instead.) =
        [] 0 setdash strokepath} if
    clip
} bind def

% desiredSize EvenPixels closestSize
%
% The procedure below is used for stippling.  Given the optimal size
% of a dot in a stipple pattern in the current user coordinate system,
% compute the closest size that is an exact multiple of the device's
% pixel size.  This allows stipple patterns to be displayed without
% aliasing effects.

/EvenPixels {
    % Compute exact number of device pixels per stipple dot.
    dup 0 matrix currentmatrix dtransform
    dup mul exch dup mul add sqrt

    % Round to an integer, make sure the number is at least 1, and compute
    % user coord distance corresponding to this.
    dup round dup 1 lt {pop 1} if
    exch div mul
} bind def

% width height string StippleFill --
%
% Given a path already set up and a clipping region generated from
% it, this procedure will fill the clipping region with a stipple
% pattern.  "String" contains a proper image description of the
% stipple pattern and "width" and "height" give its dimensions.  Each
% stipple dot is assumed to be about one unit across in the current
% user coordinate system.  This procedure trashes the graphics state.

/StippleFill {
    % The following code is needed to work around a NeWSprint bug.

    /tmpstip 1 index def

    % Change the scaling so that one user unit in user coordinates
    % corresponds to the size of one stipple dot.
    1 EvenPixels dup scale

    % Compute the bounding box occupied by the path (which is now
    % the clipping region), and round the lower coordinates down
    % to the nearest starting point for the stipple pattern.  Be
    % careful about negative numbers, since the rounding works
    % differently on them.

    pathbbox
    4 2 roll
    5 index div dup 0 lt {1 sub} if cvi 5 index mul 4 1 roll
    6 index div dup 0 lt {1 sub} if cvi 6 index mul 3 2 roll

    % Stack now: width height string y1 y2 x1 x2
    % Below is a doubly-nested for loop to iterate across this area
    % in units of the stipple pattern size, going up columns then
    % across rows, blasting out a stipple-pattern-sized rectangle at
    % each position

    6 index exch {
        2 index 5 index 3 index {
            % Stack now: width height string y1 y2 x y

            gsave
            1 index exch translate
            5 index 5 index true matrix tmpstip imagemask
            grestore
        } for
        pop
    } for
    pop pop pop pop pop
} bind def

% -- AdjustColor --
% Given a color value already set for output by the caller, adjusts
% that value to a grayscale or mono value if requested by the CL
% variable.

/AdjustColor {
    CL 2 lt {
        currentgray
        CL 0 eq {
            .5 lt {0} {1} ifelse
        } if
        setgray
    } if
} bind def

% x y strings spacing xoffset yoffset justify stipple DrawText --
% This procedure does all of the real work of drawing text.  The
% color and font must already have been set by the caller, and the
% following arguments must be on the stack:
%
% x, y -        Coordinates at which to draw text.
% strings -     An array of strings, one for each line of the text item,
%               in order from top to bottom.
% spacing -     Spacing between lines.
% xoffset -     Horizontal offset for text bbox relative to x and y: 0 for
%               nw/w/sw anchor, -0.5 for n/center/s, and -1.0 for ne/e/se.
% yoffset -     Vertical offset for text bbox relative to x and y: 0 for
%               nw/n/ne anchor, +0.5 for w/center/e, and +1.0 for sw/s/se.
% justify -     0 for left justification, 0.5 for center, 1 for right justify.
% stipple -     Boolean value indicating whether or not text is to be
%               drawn in stippled fashion.  If text is stippled,
%               procedure StippleText must have been defined to call
%               StippleFill in the right way.
%
% Also, when this procedure is invoked, the color and font must already
% have been set for the text.

/DrawText {
    /stipple exch def
    /justify exch def
    /yoffset exch def
    /xoffset exch def
    /spacing exch def
    /strings exch def

    % First scan through all of the text to find the widest line.

    /lineLength 0 def
    strings {
        cstringwidth pop
        dup lineLength gt {/lineLength exch def} {pop} ifelse
        newpath
    } forall

    % Compute the baseline offset and the actual font height.

    0 0 moveto (TXygqPZ) false charpath
    pathbbox dup /baseline exch def
    exch pop exch sub /height exch def pop
    newpath

    % Translate coordinates first so that the origin is at the upper-left
    % corner of the text's bounding box. Remember that x and y for
    % positioning are still on the stack.

    translate
    lineLength xoffset mul
    strings length 1 sub spacing mul height add yoffset mul translate

    % Now use the baseline and justification information to translate so
    % that the origin is at the baseline and positioning point for the
    % first line of text.

    justify lineLength mul baseline neg translate

    % Iterate over each of the lines to output it.  For each line,
    % compute its width again so it can be properly justified, then
    % display it.

    strings {
        dup cstringwidth pop
        justify neg mul 0 moveto
        stipple {
           
 
            % The text is stippled, so turn it into a path and print
            % by calling StippledText, which in turn calls StippleFill.
            % Unfortunately, many Postscript interpreters will get
            % overflow errors if we try to do the whole string at
            % once, so do it a character at a time.

            gsave
            /char (X) def
            {
                dup type /stringtype eq {
                    % This segment is a string.
                    {
                        char 0 3 -1 roll put
                        currentpoint
                        gsave
                        char true charpath clip StippleText
                        grestore
                        char stringwidth translate
                        moveto
                    } forall
                } {
                    % This segment is glyph name
                    % Temporary override
                    currentfont /Encoding get exch 1 exch put
                    currentpoint
                    gsave (\001) true charpath clip StippleText
                    grestore
                    (\001) stringwidth translate
                    moveto
                } ifelse
            } forall
            grestore 
        } {cstringshow} ifelse
        0 spacing neg translate
    } forall
} bind def

%%EndProlog
%%BeginSetup
/CL 2 def
%%EndSetup

%%Page: 1 1
save
306.0 396.0 translate
0.75 0.75 scale
-2537715 -391 translate
2537027 782 moveto 2538404 782 lineto 2538404 0 lineto 2537027 0 lineto closepath clip newpath
gsave
2535641.1828 -1007.55440000072 moveto
2589590.9952 34958.9872000003 lineto
2572363.47134961 2354.86766358558 lineto
2535641.1828 -1007.55440000072 lineto
1 setlinejoin 1 setlinecap
1 setlinewidth
[] 0 setdash
0.000 1.000 0.000 setrgbcolor AdjustColor
stroke
grestore
gsave
2572363.47134961 2354.86766358558 moveto
2571782.61170278 -35586.2370702559 lineto
2535641.1828 -1007.55440000072 lineto
2572363.47134961 2354.86766358558 lineto
1 setlinejoin 1 setlinecap
1 setlinewidth
[] 0 setdash
0.000 1.000 0.000 setrgbcolor AdjustColor
stroke
grestore
gsave
2537796.175296 434.10726399906 moveto 6.00000000046566 0 rlineto 0 -5.99999999906868 rlineto -6.00000000046566 0 rlineto closepath
1.000 1.000 1.000 setrgbcolor AdjustColor
fill
2537796.175296 434.10726399906 moveto 6.00000000046566 0 rlineto 0 -5.99999999906868 rlineto -6.00000000046566 0 rlineto closepath
0 setlinejoin 2 setlinecap
1 setlinewidth
[] 0 setdash
0.000 0.000 0.000 setrgbcolor AdjustColor
stroke
grestore
restore showpage

%%Trailer
end
%%EOF