source: DVD_images/Jonos_README.txt @ 7215

#PARAMETERS
# For this model run the following parameters were set in the project.py file:

tide = 1.0                      # Tide height above mean sea level. Tide is modelled in ANUGA as a constant
                                # height above or below MSL.
event_number = 51436    # Event number from probabilistic tsunami hazard map of Australia
                                # 1 in 10000 yr event from New Hebrides


# ELEVATION DATA
#The following elevation data sources were set in the project.py file:

# Format for ascii grids: as produced in ArcGIS (e.g. using Conversion Tools - Raster to ASCII)
# Must also include a projection file of the same name
# Data must be projected in correct UTM zone
ascii_grid_filenames = ['1a                                             # Listed without file extension
                        '1b',
                        '2b',
                        '2a_3',
                        '3b',
                        '3a',
                        '4a_2',
                        '4b',
                        'off1',
                        'off2',
                        'off3',
                        'bbhd',
                        'sd100031996_p',
                        'sd100031996_p2',
                        'sd100031996_p3',
                        'sd100031996_p4']

# Format for point is x,y,elevation (with header, projected coordinates)                    
point_filenames = ['SD100031996_jgriffin_clip.csv',             # Listed with file extension
                   'tomaga_offshore_AHD_MGA_1997.csv',
                   'Batemans_BBHD_MGA_1995.csv',
                   'moruya_AHD_MGA_2000.csv']

# To include new data please prepare data in the same formats as those above. 
# For further information on ANUGA file formats please see the ANUGA User Maunal section 6.1