source: anuga_validation/automated_validation_tests/patong_beach_validation/project.py @ 7651

Last change on this file since 7651 was 7651, checked in by ole, 15 years ago

Got patong auto validation working and tested for TRIAL run

File size: 10.0 KB
Line 
1"""
2This file contains all your file and directory definitions
3for elevation, meshes and outputs.
4"""
5
6import os
7from anuga.utilities.system_tools import get_user_name, get_host_name
8from time import localtime, strftime, gmtime
9from os.path import join, exists
10
11
12#------------------------------------------------------------------------------
13# Directory setup
14#------------------------------------------------------------------------------
15
16# this section needs to be updated to reflect the modelled community.
17# Note, the user needs to set up the directory system accordingly
18state = 'thailand'
19scenario_name = 'patong'
20scenario_folder = 'patong_tsunami_scenario'
21
22#------------------------------------------------------------------------------
23# Initial Conditions
24#------------------------------------------------------------------------------
25
26# Model specific parameters.
27# One or all can be changed each time the run_model script is executed
28tide = 0.8              # difference between MSL and HAT
29zone = 47               # specify zone of model
30model = 'small'         # different size model 'small' or 'large'
31event_number = 'mux_' + model    # the event number or the mux file name
32alpha = 0.1             # smoothing parameter for mesh
33friction = 0.01         # manning's friction coefficient
34starttime = 0           # start time for simulation
35finaltime = 15000       # final time for simulation
36
37use_buildings = True
38setup = 'trial'         # This can be one of three values
39                        #    trial - coarsest mesh, fast
40                        #    basic - coarse mesh
41                        #    final - fine mesh, slowest
42
43#------------------------------------------------------------------------------
44# Output filename
45#
46# Your output filename should be unique between different runs on different
47# data.
48# The list of items below will be used to create a file in your output
49# directory.
50# Your user name and time+date will be automatically added.  For example,
51#     [setup, tide, event_number]
52# will result in a filename like
53#     20090212_091046_run_final_0_27283_rwilson
54#------------------------------------------------------------------------------
55
56output_comment = [setup, tide, event_number, 'final']
57
58#------------------------------------------------------------------------------
59# Input Data
60#------------------------------------------------------------------------------
61
62# ELEVATION DATA
63# Used in build_elevation.py
64# Format for ascii grids, as produced in ArcGIS + a projection file
65ascii_grid_filenames = []
66
67# Format for point is x,y,elevation (with header)
68point_filenames = ['patong_10m_grid_msl_Project.txt',    # 10m main grid
69                   'patong_10m_small_grid_for_anuga_sub_Project.txt', # 10m saddle
70                   'patong_bay_1s_grid_Project.txt',   # 1s grid
71                   'andaman_3s_grid_Clip2_Project.txt'] #3s grid
72
73### Add csv header list to all files in point_filenames
74##headerlist = ['x', 'y', 'elevation']
75##for f in point_filenames:
76##    add_csv_header(join(topographies_folder, f), headerlist)
77
78extent_polygon_filenames = ['patong_10m.txt',
79                            'saddle_10m.txt',
80                            'patong_1s.txt']
81
82
83# BOUNDING POLYGON - for data clipping and estimate of triangles in mesh
84# Used in build_elevation.py
85# Format for points easting,northing (no header)
86bounding_polygon_filename = 'bounding_polygon_'+ model + '.csv'
87bounding_polygon_maxarea = 100000
88
89# INTERIOR REGIONS -  for designing the mesh
90# Used in run_model.py
91# Format for points easting,northing (no header)                   
92interior_regions_data = [['inundation_area.csv', 75],
93                         ['aoi.csv', 200],
94                         ['aos.csv', 900],
95                         ['sw_coast_original.csv', 7000],
96                         ['building_main.csv', 20],
97                         ['building_main_small.csv', 20],
98                         ['building_main_south.csv', 20],
99                         ['building_saddle.csv', 20]]
100
101
102# LAND - used to set the initial stage/water to be offcoast only
103# Used in run_model.py.  Format for points easting,northing (no header)
104land_initial_conditions_filename = [['initial_conditions_' + model +'.csv', 0]]
105
106# GAUGES - for creating timeseries at a specific point
107# Used in get_timeseries.py. 
108# Format easting,northing,name,elevation (with header)
109gauges_filename = 'gauges.csv'
110
111# BUILDINGS POLYOGN - for elevation of buildings
112# Used in run_model.py
113# Format easting,northing,id,floor (with header)
114building_polygon_filename = 'buildings.csv' 
115
116
117# BUILDINGS EXPOSURE - for identifying inundated houses
118# Used in run_building_inundation.py
119# Format latitude,longitude etc (geographic)
120building_exposure_filename = 'busselton_res_clip.csv' # from NEXIS
121
122# BOUNDING POLYGON - used in build_boundary.py and run_model.py respectively
123# NOTE: when files are put together the points must be in sequence
124# For ease go clockwise!
125# Check the run_model.py for boundary_tags
126
127# Thinned ordering file from Hazard Map (geographic)
128# Format is index,latitude,longitude (with header)
129urs_order_filename = 'urs_order_'+ model +'.csv'
130
131# Landward bounding points
132# Format easting,northing (no header)
133landward_boundary_filename = 'landward_boundary_'+ model +'.csv'
134
135# MUX input filename.
136# If a meta-file from EventSelection is used, set 'multi-mux' to True.
137# If a single MUX stem filename (*.grd) is used, set 'multi-mux' to False.
138mux_input_filename = event_number # to be found in event_folder
139                                    # (ie boundaries/event_number/)
140multi_mux = False
141##mux_input_filename = 'event.list'
142##multi_mux = True
143
144#------------------------------------------------------------------------------
145# Clipping regions for export to asc and regions for clipping data
146# Final inundation maps should only be created in regions of the finest mesh
147#------------------------------------------------------------------------------
148
149#CBD extract ascii grid - coordinates from patong_1s extent
150xminCBD = 417445.1119
151xmaxCBD = 425601.7881
152yminCBD = 870663.4547
153ymaxCBD = 876965.3856
154
155
156################################################################################
157################################################################################
158####         NOTE: NOTHING WOULD NORMALLY CHANGE BELOW THIS POINT.          ####
159################################################################################
160################################################################################
161
162# Get system user and host names.
163# These values can be used to distinguish between two similar runs by two
164# different users or runs by the same user on two different machines.
165user = get_user_name()
166host = get_host_name()
167
168#-------------------------------------------------------------------------------
169# Output Elevation Data
170#-------------------------------------------------------------------------------
171
172# Output filename for elevation
173# this is a combination of all the data generated in build_elevation.py
174combined_elevation_basename = scenario_name + '_combined_elevation_' + model
175
176#-------------------------------------------------------------------------------
177# Directory Structure
178#-------------------------------------------------------------------------------
179
180# determines time for setting up output directories
181time = strftime('%Y%m%d_%H%M%S', localtime()) 
182gtime = strftime('%Y%m%d_%H%M%S', gmtime()) 
183build_time = time + '_build_' + model
184run_time = time + '_run_'
185
186# create paths for data files.
187output_dirname = os.path.dirname(__file__)
188home = os.path.join(output_dirname, 'local_data', 'data')
189muxhome = home # FIXME (Ole): Get rid off
190
191   
192# check various directories/files that must exist
193anuga_folder = join(home, state, scenario_folder, 'anuga')
194topographies_folder = join(anuga_folder, 'topographies')
195polygons_folder = join(anuga_folder, 'polygons')
196boundaries_folder = join(anuga_folder, 'boundaries')
197output_folder = join(anuga_folder, 'outputs')
198gauges_folder = join(anuga_folder, 'gauges')
199meshes_folder = join(anuga_folder, 'meshes')
200event_folder = join(boundaries_folder, str(event_number))
201
202# MUX data files
203# Directory containing the MUX data files to be used with EventSelection.
204mux_data_folder = join(muxhome, 'mux')
205
206#------------------------------------------------------------------------------
207# Location of input and output data
208#------------------------------------------------------------------------------
209
210# Convert the user output_comment to a string for run_model.py
211output_comment = ('_'.join([str(x) for x in output_comment if x != user])
212                  + '_' + user)
213
214# The absolute pathname of the all elevation, generated in build_elevation.py
215combined_elevation = join(topographies_folder, combined_elevation_basename)
216
217# The absolute pathname of the mesh, generated in run_model.py
218meshes = join(meshes_folder, scenario_name) + model +'.msh'
219
220# The pathname for the urs order points, used within build_urs_boundary.py
221urs_order = join(boundaries_folder, urs_order_filename)
222
223# The absolute pathname for the landward points of the bounding polygon,
224# Used within run_model.py)
225landward_boundary = join(boundaries_folder, landward_boundary_filename)
226
227# The absolute pathname for the .sts file, generated in build_boundary.py
228event_sts = join(event_folder, scenario_name)
229
230# The absolute pathname for the output folder names
231# Used for build_elevation.py
232output_build = join(output_folder, build_time) + '_' + str(user) 
233# Used for run_model.py
234output_run = join(output_folder, run_time) + output_comment
235# Used by post processing
236output_run_time = join(output_run, scenario_name) 
237
238# The absolute pathname for the gauges file
239# Used for get_timeseries.py
240gauges = join(gauges_folder, gauges_filename)
241
242# The absolute pathname for the gauges file
243# Used for run_model.py
244building_polygon = join(polygons_folder, building_polygon_filename)
245
246# The absolute pathname for the building file
247# Used for run_building_inundation.py
248building_exposure = join(gauges_folder, building_exposure_filename)
249
250# full path to where MUX files (or meta-files) live
251mux_input = join(event_folder, mux_input_filename)
252
Note: See TracBrowser for help on using the repository browser.