| [4444] | 1 | """Create mesh for University of Queensland dam break flume |
|---|
| 2 | """ |
|---|
| 3 | |
|---|
| 4 | from math import cos, radians |
|---|
| 5 | from anuga.pmesh.mesh import * |
|---|
| 6 | from anuga.coordinate_transforms.geo_reference import Geo_reference |
|---|
| 7 | |
|---|
| 8 | |
|---|
| 9 | #Basic geometry |
|---|
| 10 | xslope = 2.5 |
|---|
| 11 | |
|---|
| 12 | def generate(mesh_filename, beach_angle, toe_to_nails_distance, |
|---|
| 13 | is_coarse = True): |
|---|
| 14 | """ |
|---|
| 15 | Generate mesh for Saman's flume flume. |
|---|
| 16 | The gate position is the distance from the right wall of the wave tank |
|---|
| 17 | to the gate. |
|---|
| 18 | |
|---|
| 19 | """ |
|---|
| 20 | #Basic geometry |
|---|
| 21 | |
|---|
| 22 | xright = 5.25 |
|---|
| 23 | ybottom = 0 |
|---|
| 24 | ytop = 0.30 |
|---|
| 25 | xdam = 0.0 |
|---|
| 26 | xleft = -0.5 |
|---|
| 27 | #xslope = self.xslope |
|---|
| 28 | |
|---|
| 29 | nails_length_x = 0.15 |
|---|
| 30 | |
|---|
| 31 | xnailsleft = xslope + toe_to_nails_distance*cos(radians(beach_angle)) |
|---|
| 32 | xnailsright = xslope + (toe_to_nails_distance+ nails_length_x) \ |
|---|
| 33 | *cos(radians(beach_angle)) |
|---|
| 34 | |
|---|
| 35 | |
|---|
| 36 | |
|---|
| 37 | #Outline |
|---|
| 38 | point_sw = [xleft, ybottom] |
|---|
| 39 | point_se = [xright, ybottom] |
|---|
| 40 | point_nw = [xleft, ytop] |
|---|
| 41 | point_ne = [xright, ytop] |
|---|
| 42 | |
|---|
| 43 | # Dam seperation (left) |
|---|
| 44 | point_dam_top = [xdam, ytop] |
|---|
| 45 | point_dam_bottom = [xdam, ybottom] |
|---|
| 46 | |
|---|
| 47 | # slope seperation (middle) |
|---|
| 48 | point_slope_top = [xslope, ytop] |
|---|
| 49 | point_slope_bottom = [xslope, ybottom] |
|---|
| 50 | |
|---|
| 51 | # nail seperation (after slope, left) |
|---|
| 52 | point_nails_left_top = [xnailsleft, ytop] |
|---|
| 53 | point_nails_left_bottom = [xnailsleft, ybottom] |
|---|
| 54 | |
|---|
| 55 | # nail seperation (after slope, right) |
|---|
| 56 | point_nails_right_top = [xnailsright, ytop] |
|---|
| 57 | point_nails_right_bottom = [xnailsright, ybottom] |
|---|
| 58 | |
|---|
| 59 | |
|---|
| 60 | m = Mesh() |
|---|
| 61 | |
|---|
| 62 | #Boundary |
|---|
| 63 | points = [point_sw, #se |
|---|
| 64 | point_nw, |
|---|
| 65 | point_dam_top, |
|---|
| 66 | point_slope_top, |
|---|
| 67 | point_nails_left_top, |
|---|
| 68 | point_nails_right_top, |
|---|
| 69 | point_ne, |
|---|
| 70 | point_se, |
|---|
| 71 | point_nails_right_bottom, |
|---|
| 72 | point_nails_left_bottom, |
|---|
| 73 | point_slope_bottom, |
|---|
| 74 | point_dam_bottom |
|---|
| 75 | ] |
|---|
| 76 | |
|---|
| 77 | segments = [[0,1], [1,2], [2,3], |
|---|
| 78 | [3,4 ],[4,5], [5,6],[6,7],[7,8], |
|---|
| 79 | [8,9], [9,10],[10,11],[11,0],#The outer border |
|---|
| 80 | [2,11], #dam Separator |
|---|
| 81 | [3,10], # slope separator |
|---|
| 82 | [4,9], # nails left separator |
|---|
| 83 | [5,8]] # nails right separator |
|---|
| 84 | |
|---|
| 85 | segment_tags = {'wall':[0,1,2,3,5,6,7,8,9,10,11],'edge':[4]} |
|---|
| 86 | |
|---|
| 87 | m.add_points_and_segments(points, segments, segment_tags) |
|---|
| 88 | |
|---|
| 89 | |
|---|
| 90 | if is_coarse == True: |
|---|
| 91 | #nails_max_area = 0.001 |
|---|
| 92 | general_max_area = 0.01 |
|---|
| 93 | segment_count = 8 |
|---|
| 94 | nails_x = 2 |
|---|
| 95 | nails_y = 5 |
|---|
| 96 | nail_spacing = 0.060 # distance between nail centers |
|---|
| 97 | nail_radius = 0.01 |
|---|
| 98 | else: |
|---|
| 99 | #nails_max_area = 0.000001 |
|---|
| 100 | general_max_area = 0.0001 |
|---|
| 101 | segment_count = 20 |
|---|
| 102 | nails_x = 8 |
|---|
| 103 | nails_y = 19 |
|---|
| 104 | nail_spacing = 0.015 # distance between nail centers |
|---|
| 105 | nail_radius = 0.0025 |
|---|
| 106 | |
|---|
| 107 | #Add the nails |
|---|
| 108 | for x_i in range(1,nails_x + 1): |
|---|
| 109 | for y_i in range(1,nails_y + 1): |
|---|
| 110 | center_point = (xnailsleft+(x_i*nail_spacing), y_i*nail_spacing) |
|---|
| 111 | m.add_circle(center_point, radius = nail_radius, |
|---|
| 112 | segment_count = segment_count, |
|---|
| 113 | tag = 'wall', |
|---|
| 114 | hole = True) |
|---|
| 115 | |
|---|
| 116 | |
|---|
| 117 | # this is the location of the reservoir region. |
|---|
| 118 | dam = m.add_region(-0.0000001,(ytop - ybottom)/2) |
|---|
| 119 | dam.setTag("dam") |
|---|
| 120 | |
|---|
| 121 | # this is the location of the slope region, before the nails. |
|---|
| 122 | slope = m.add_region(xslope + 0.0000001,(ytop - ybottom)/2) |
|---|
| 123 | slope.setTag("slope") |
|---|
| 124 | |
|---|
| 125 | # this is the location of the slope region, after the nails. |
|---|
| 126 | slope = m.add_region(xnailsright + 0.0000001,(ytop - ybottom)/2) |
|---|
| 127 | slope.setTag("slope") |
|---|
| 128 | |
|---|
| 129 | # this is the location of the nails region, after the nails. |
|---|
| 130 | nails = m.add_region(xnailsleft + 0.0000001,(ytop - ybottom)/2) |
|---|
| 131 | nails.setTag("nails") |
|---|
| 132 | #nails.setMaxArea(nails_max_area) |
|---|
| 133 | |
|---|
| 134 | |
|---|
| 135 | m.generate_mesh(maximum_triangle_area=general_max_area) |
|---|
| 136 | |
|---|
| 137 | m.export_mesh_file(mesh_filename) |
|---|
| 138 | print "mesh created" |
|---|
| 139 | |
|---|
| 140 | #------------------------------------------------------------- |
|---|
| 141 | if __name__ == "__main__": |
|---|
| 142 | generate("aa.tsh", beach_angle = 15, toe_to_nails_distance = 1.0, |
|---|
| 143 | is_coarse = False) |
|---|
