source: anuga_work/production/australia_ph2/broome/project.py @ 6601

Last change on this file since 6601 was 6601, checked in by myall, 15 years ago
File size: 8.6 KB
Line 
1"""
2This file contains all your file and directory definitions
3for elevation, meshes and outputs.
4"""
5
6import os
7from anuga.utilities.system_tools import get_user_name, get_host_name
8from time import localtime, strftime, gmtime
9from os.path import join, exists
10
11
12#-------------------------------------------------------------------------------
13# Directory setup
14#-------------------------------------------------------------------------------
15
16# this section needs to be updated to reflect the modelled community.
17# Note, the user needs to set up the directory system accordingly
18state = 'australia_ph2'
19scenario_name = 'broome'
20scenario_folder = scenario_name
21
22#-------------------------------------------------------------------------------
23# Initial Conditions
24#-------------------------------------------------------------------------------
25
26# Model specific parameters.
27# One or all can be changed each time the run_model script is executed
28tide = 0                # difference between MSL and HAT
29zone = 51               # specify zone of model
30event_number = 70468    # (sumba) the event number or the mux file name
31alpha = 0.1             # smoothing parameter for mesh
32friction=0.01           # manning's friction coefficient
33starttime=0             # start time for simulation
34finaltime=80000          # final time for simulation
35
36# index is only used when wave = Tb
37index = 1693            # index from the PTHA - Y2000 5.4259m
38wave = 'Bf'             # Bf (sts wave) Tb (index wave)
39
40
41setup = 'final'         # This can be one of three values
42                        #    trial - coarsest mesh, fast
43                        #    basic - coarse mesh
44                        #    final - fine mesh, slowest
45
46#-------------------------------------------------------------------------------
47# Output filename
48#
49# Your output filename should be unique between different runs on different data.
50# The list of items below will be used to create a file in your output directory.
51# Your user name and time+date will be automatically added.  For example,
52#     [setup, tide, event_number]
53# will result in a filename like
54#     20090212_091046_run_final_0_27283_rwilson
55#-------------------------------------------------------------------------------
56
57output_comment = [setup, tide, event_number, index, wave]
58
59#-------------------------------------------------------------------------------
60# Input Data
61#-------------------------------------------------------------------------------
62
63# ELEVATION DATA
64# Used in build_elevation.py
65# Format for ascii grids, as produced in ArcGIS + a projection file
66ascii_grid_filenames = [] # Grid data
67
68# Format for point is x,y,elevation (with header)
69point_filenames = ['grid.txt']            # 250m grid 2005
70
71# BOUNDING POLYGON - for data clipping and estimate of triangles in mesh
72# Used in build_elevation.py
73# Format for points easting,northing (no header)
74bounding_polygon_filename = 'bounding_polygon.csv'
75bounding_polygon_maxarea = 100000
76
77# INTERIOR REGIONS -  for designing the mesh
78# Used in run_model.py
79# Format for points easting,northing (no header)                   
80interior_regions_data = []
81
82# LAND - used to set the initial stage/water to be offcoast only
83# Used in run_model.py.  Format for points easting,northing (no header)
84land_initial_conditions_filename = []
85
86# GAUGES - for creating timeseries at a specific point
87# Used in get_timeseries.py. 
88# Format easting,northing,name,elevation (with header)
89gauges_filename = 'gauges.csv'
90
91# BUILDINGS EXPOSURE - for identifying inundated houses
92# Used in run_building_inundation.py
93# Format latitude,longitude etc (geographic)
94building_exposure_filename = 'busselton_res_clip.csv' # from NEXIS
95
96# BOUNDING POLYGON - used in build_boundary.py and run_model.py respectively
97# NOTE: when files are put together the points must be in sequence
98# For ease go clockwise!
99# Check the run_model.py for boundary_tags
100
101# Thinned ordering file from Hazard Map (geographic)
102# Format is index,latitude,longitude (with header)
103urs_order_filename = 'urs_order.csv'
104
105# Landward bounding points
106# Format easting,northing (no header)
107landward_boundary_filename = 'landward_boundary.csv'
108
109# MUX input filename.
110# If a meta-file from EventSelection is used, set 'multi-mux' to True.
111# If a single MUX stem filename (*.grd) is used, set 'multi-mux' to False.
112##mux_input_filename = event_number # to be found in event_folder
113                                    # (ie boundaries/event_number/)
114##multi_mux = False
115mux_input_filename = 'event.list'
116multi_mux = True
117
118
119################################################################################
120################################################################################
121####         NOTE: NOTHING WOULD NORMALLY CHANGE BELOW THIS POINT.          ####
122################################################################################
123################################################################################
124
125# Get system user and host names.
126# These values can be used to distinguish between two similar runs by two
127# different users or runs by the same user on two different machines.
128user = get_user_name()
129host = get_host_name()
130
131# Environment variable names.
132# The inundation directory, not the data directory.
133ENV_INUNDATIONHOME = 'INUNDATIONHOME'
134
135# Path to MUX data
136ENV_MUXHOME = 'MUXHOME'
137
138#-------------------------------------------------------------------------------
139# Output Elevation Data
140#-------------------------------------------------------------------------------
141
142# Output filename for elevation
143# this is a combination of all the data generated in build_elevation.py
144combined_elevation_basename = scenario_name + '_combined_elevation'
145
146#-------------------------------------------------------------------------------
147# Directory Structure
148#-------------------------------------------------------------------------------
149
150# determines time for setting up output directories
151time = strftime('%Y%m%d_%H%M%S', localtime()) 
152gtime = strftime('%Y%m%d_%H%M%S', gmtime()) 
153build_time = time + '_build'
154run_time = time + '_run_'
155
156# create paths generated from environment variables.
157home = join(os.getenv(ENV_INUNDATIONHOME), 'data') # Absolute path for data folder
158muxhome = os.getenv(ENV_MUXHOME)
159   
160# check various directories/files that must exist
161anuga_folder = join(home, state, scenario_folder, 'anuga')
162topographies_folder = join(anuga_folder, 'topographies')
163polygons_folder = join(anuga_folder, 'polygons')
164boundaries_folder = join(anuga_folder, 'boundaries')
165output_folder = join(anuga_folder, 'outputs')
166gauges_folder = join(anuga_folder, 'gauges')
167meshes_folder = join(anuga_folder, 'meshes')
168event_folder = join(boundaries_folder, str(event_number))
169
170# MUX data files
171# Directory containing the MUX data files to be used with EventSelection.
172mux_data_folder = join(muxhome, 'mux')
173
174#-------------------------------------------------------------------------------
175# Location of input and output data
176#-------------------------------------------------------------------------------
177
178# Convert the user output_comment to a string for run_model.py
179output_comment = ('_'.join([str(x) for x in output_comment if x != user])
180                  + '_' + user)
181
182# The absolute pathname of the all elevation, generated in build_elevation.py
183combined_elevation = join(topographies_folder, combined_elevation_basename)
184
185# The absolute pathname of the mesh, generated in run_model.py
186meshes = join(meshes_folder, scenario_name) + '.msh'
187
188# The pathname for the urs order points, used within build_urs_boundary.py
189urs_order = join(boundaries_folder, urs_order_filename)
190
191# The absolute pathname for the landward points of the bounding polygon,
192# Used within run_model.py)
193landward_boundary = join(boundaries_folder, landward_boundary_filename)
194
195# The absolute pathname for the .sts file, generated in build_boundary.py
196event_sts = join(event_folder, scenario_name)
197
198# The absolute pathname for the output folder names
199# Used for build_elevation.py
200output_build = join(output_folder, build_time) + '_' + str(user) 
201# Used for run_model.py
202output_run = join(output_folder, run_time) + output_comment
203# Used by post processing
204output_run_time = join(output_run, scenario_name) 
205
206# The absolute pathname for the gauges file
207# Used for get_timeseries.py
208gauges = join(gauges_folder, gauges_filename)       
209
210# The absolute pathname for the building file
211# Used for run_building_inundation.py
212building_exposure = join(gauges_folder, building_exposure_filename)
213
214# full path to where MUX files (or meta-files) live
215mux_input = join(event_folder, mux_input_filename)
216
217# sts gauge with desired index number - used for wave 'Tb'
218boundary_csv = join(event_folder, 'sts_gauge_' + str(index) + '.csv')
Note: See TracBrowser for help on using the repository browser.