source: anuga_work/production/australia_ph2/esperance/project.py @ 6399

Last change on this file since 6399 was 6399, checked in by myall, 15 years ago

rebuilding the eucla motel and esperance scripts

File size: 8.5 KB
Line 
1"""
2This file contains all your file and directory definitions
3for elevation, meshes and outputs.
4"""
5
6import os
7from anuga.utilities.system_tools import get_user_name, get_host_name
8from time import localtime, strftime, gmtime
9from os.path import join, exists
10
11
12#-------------------------------------------------------------------------------
13# Directory setup
14#-------------------------------------------------------------------------------
15
16# this section needs to be updated to reflect the modelled community.
17# Note, the user needs to set up the directory system accordingly
18state = 'australia_ph2'
19scenario_name = 'esperance'
20scenario_folder = scenario_name
21
22#-------------------------------------------------------------------------------
23# Initial Conditions
24#-------------------------------------------------------------------------------
25
26# Model specific parameters.
27# One or all can be changed each time the run_model script is executed
28tide = 0                # difference between MSL and HAT
29zone = 56               # specify zone of model
30event_number = 58362    # the event number or the mux file name
31alpha = 0.1             # smoothing parameter for mesh
32friction=0.01           # manning's friction coefficient
33starttime=0             # start time for simulation
34finaltime=1000          # final time for simulation
35
36setup = 'trial'         # This can be one of three values
37                        #    trial - coarsest mesh, fast
38                        #    basic - coarse mesh
39                        #    final - fine mesh, slowest
40
41#-------------------------------------------------------------------------------
42# Output filename
43#
44# Your output filename should be unique between different runs on different data.
45# The list of items below will be used to create a file in your output directory.
46# Your user name and time+date will be automatically added.  For example,
47#     [setup, tide, event_number]
48# will result in a filename like
49#     20090212_091046_run_final_0_27283_rwilson
50#-------------------------------------------------------------------------------
51
52output_comment = [setup, tide, event_number]
53
54#-------------------------------------------------------------------------------
55# Input Data
56#-------------------------------------------------------------------------------
57
58# ELEVATION DATA
59# Used in build_elevation.py
60# Format for ascii grids, as produced in ArcGIS + a projection file
61ascii_grid_filenames = [] # 250m grid 2005
62
63# Format for point is x,y,elevation (with header)
64point_filenames = ['brisbane_250m.txt',
65                   'GBR_250m.txt',
66                   'Sydney_250m.txt'] # 250m grid 2005
67
68### Add csv header list to all files in point_filenames
69##headerlist = ['x', 'y', 'elevation']
70##for f in point_filenames:
71##    add_csv_header(join(topographies_folder, f), headerlist)
72
73    # BOUNDING POLYGON - for data clipping and estimate of triangles in mesh
74# Used in build_elevation.py
75# Format for points easting,northing (no header)
76bounding_polygon_filename = 'bounding_polygon.csv'
77bounding_polygon_maxarea = 100000
78
79# INTERIOR REGIONS -  for designing the mesh
80# Used in run_model.py
81# Format for points easting,northing (no header)                   
82interior_regions_data = []
83
84# LAND - used to set the initial stage/water to be offcoast only
85# Used in run_model.py.  Format for points easting,northing (no header)
86land_initial_conditions_filename = []
87
88# GAUGES - for creating timeseries at a specific point
89# Used in get_timeseries.py. 
90# Format easting,northing,name,elevation (with header)
91gauges_filename = 'gauges.csv'
92
93# BUILDINGS EXPOSURE - for identifying inundated houses
94# Used in run_building_inundation.py
95# Format latitude,longitude etc (geographic)
96building_exposure_filename = 'busselton_res_clip.csv' # from NEXIS
97
98# BOUNDING POLYGON - used in build_boundary.py and run_model.py respectively
99# NOTE: when files are put together the points must be in sequence
100# For ease go clockwise!
101# Check the run_model.py for boundary_tags
102
103# Thinned ordering file from Hazard Map (geographic)
104# Format is index,latitude,longitude (with header)
105urs_order_filename = 'urs_order.csv'
106
107# Landward bounding points
108# Format easting,northing (no header)
109landward_boundary_filename = 'landward_boundary.csv'
110
111# MUX input filename.
112# If a meta-file from EventSelection is used, set 'multi-mux' to True.
113# If a single MUX stem filename (*.grd) is used, set 'multi-mux' to False.
114##mux_input_filename = event_number # to be found in event_folder
115                                    # (ie boundaries/event_number/)
116##multi_mux = False
117mux_input_filename = 'event.list'
118multi_mux = True
119
120
121################################################################################
122################################################################################
123####         NOTE: NOTHING WOULD NORMALLY CHANGE BELOW THIS POINT.          ####
124################################################################################
125################################################################################
126
127# Get system user and host names.
128# These values can be used to distinguish between two similar runs by two
129# different users or runs by the same user on two different machines.
130user = get_user_name()
131host = get_host_name()
132
133# Environment variable names.
134# The inundation directory, not the data directory.
135ENV_INUNDATIONHOME = 'INUNDATIONHOME'
136
137# Path to MUX data
138ENV_MUXHOME = 'MUXHOME'
139
140#-------------------------------------------------------------------------------
141# Output Elevation Data
142#-------------------------------------------------------------------------------
143
144# Output filename for elevation
145# this is a combination of all the data generated in build_elevation.py
146combined_elevation_basename = scenario_name + '_combined_elevation'
147
148#-------------------------------------------------------------------------------
149# Directory Structure
150#-------------------------------------------------------------------------------
151
152# determines time for setting up output directories
153time = strftime('%Y%m%d_%H%M%S', localtime()) 
154gtime = strftime('%Y%m%d_%H%M%S', gmtime()) 
155build_time = time + '_build'
156run_time = time + '_run_'
157
158# create paths generated from environment variables.
159home = join(os.getenv(ENV_INUNDATIONHOME), 'data') # Absolute path for data folder
160muxhome = os.getenv(ENV_MUXHOME)
161   
162# check various directories/files that must exist
163anuga_folder = join(home, state, scenario_folder, 'anuga')
164topographies_folder = join(anuga_folder, 'topographies')
165polygons_folder = join(anuga_folder, 'polygons')
166boundaries_folder = join(anuga_folder, 'boundaries')
167output_folder = join(anuga_folder, 'outputs')
168gauges_folder = join(anuga_folder, 'gauges')
169meshes_folder = join(anuga_folder, 'meshes')
170event_folder = join(boundaries_folder, str(event_number))
171
172# MUX data files
173# Directory containing the MUX data files to be used with EventSelection.
174mux_data_folder = join(muxhome, 'mux')
175
176#-------------------------------------------------------------------------------
177# Location of input and output data
178#-------------------------------------------------------------------------------
179
180# Convert the user output_comment to a string for run_model.py
181output_comment = ('_'.join([str(x) for x in output_comment if x != user])
182                  + '_' + user)
183
184# The absolute pathname of the all elevation, generated in build_elevation.py
185combined_elevation = join(topographies_folder, combined_elevation_basename)
186
187# The absolute pathname of the mesh, generated in run_model.py
188meshes = join(meshes_folder, scenario_name) + '.msh'
189
190# The pathname for the urs order points, used within build_urs_boundary.py
191urs_order = join(boundaries_folder, urs_order_filename)
192
193# The absolute pathname for the landward points of the bounding polygon,
194# Used within run_model.py)
195landward_boundary = join(boundaries_folder, landward_boundary_filename)
196
197# The absolute pathname for the .sts file, generated in build_boundary.py
198event_sts = join(event_folder, scenario_name)
199
200# The absolute pathname for the output folder names
201# Used for build_elevation.py
202output_build = join(output_folder, build_time) + '_' + str(user) 
203# Used for run_model.py
204output_run = join(output_folder, run_time) + output_comment
205# Used by post processing
206output_run_time = join(output_run, scenario_name) 
207
208# The absolute pathname for the gauges file
209# Used for get_timeseries.py
210gauges = join(gauges_folder, gauges_filename)       
211
212# The absolute pathname for the building file
213# Used for run_building_inundation.py
214building_exposure = join(gauges_folder, building_exposure_filename)
215
216# full path to where MUX files (or meta-files) live
217mux_input = join(event_folder, mux_input_filename)
218
Note: See TracBrowser for help on using the repository browser.