source: anuga_work/production/busselton/busselton_rerun/project.py @ 7385

Last change on this file since 7385 was 7119, checked in by kristy, 16 years ago
File size: 10.5 KB
Line 
1"""
2This file contains all your file and directory definitions
3for elevation, meshes and outputs.
4"""
5
6import os
7from anuga.utilities.system_tools import get_user_name, get_host_name
8from time import localtime, strftime, gmtime
9from os.path import join, exists
10
11
12#-------------------------------------------------------------------------------
13# Directory setup
14#-------------------------------------------------------------------------------
15
16# this section needs to be updated to reflect the modelled community.
17# Note, the user needs to set up the directory system accordingly
18state = 'western_australia'
19scenario_name = 'busselton'
20scenario_folder = 'busselton_tsunami_scenario'
21
22#-------------------------------------------------------------------------------
23# Initial Conditions
24#-------------------------------------------------------------------------------
25
26# Model specific parameters.
27# One or all can be changed each time the run_model script is executed
28tide = 0.6              # difference between MSL and HAT in metres
29zone = 50               # specify zone of model
30event_number = 27255    # the event number or the mux file name
31alpha = 0.1             # smoothing parameter for mesh
32friction=0.01           # manning's friction coefficient
33starttime=0             # start time for simulation
34finaltime=80000         # final time for simulation
35
36setup = 'final'         # This can be one of three values
37                        #    trial - coarsest mesh, fast
38                        #    basic - coarse mesh
39                        #    final - fine mesh, slowest
40
41#-------------------------------------------------------------------------------
42# Output filename
43#
44# Your output filename should be unique between different runs on different data.
45# The list of items below will be used to create a file in your output directory.
46# Your user name and time+date will be automatically added.  For example,
47#     [setup, tide, event_number]
48# will result in a filename like
49#     20090212_091046_run_final_0_27283_rwilson
50#-------------------------------------------------------------------------------
51
52output_comment = [setup, tide, event_number, 'Bt']
53
54#-------------------------------------------------------------------------------
55# Input Data
56#-------------------------------------------------------------------------------
57
58# ELEVATION DATA
59# Used in build_elevation.py
60# Format for ascii grids, as produced in ArcGIS + a projection file
61ascii_grid_filenames = ['busselton_v2',   # Topo
62                        'grid_250m_clip',
63                        'grid_250m_clip2'] # Busselton Topo
64
65# Format for point is x,y,elevation (with header)
66point_filenames = ['Busselton_Contour0.txt',    # Coastline
67                   'Busselton_BeachSurvey.txt', # Beach survey
68                   'Busselton_NavyFinal.txt',   # Bathymetry
69                   'Busselton_Chart.txt',       # Bathymetry Charts
70                   'Busselton_Digitised.txt',   # Digitised Fairsheet
71                   'Busselton_250m.txt',        # 250m
72                   'Bunbury_TIN.txt',           # Bunbury aoi TIN'd in ArcGIS
73                   'Busselton_TIN.txt',         # Busselton aoi TIN'd in ArcGIS
74                   'XYAHD_clip.txt']            # To extend boundary
75
76### Add csv header list to all files in point_filenames
77##headerlist = ['x', 'y', 'elevation']
78##for f in point_filenames:
79##    add_csv_header(join(topographies_folder, f), headerlist)
80
81# BOUNDING POLYGON - for data clipping and estimate of triangles in mesh
82# Used in build_elevation.py
83# Format for points easting,northing (no header)
84bounding_polygon_filename = 'bounding_polygon_new.csv'
85bounding_polygon_maxarea = 100000
86
87# INTERIOR REGIONS -  for designing the mesh
88# Used in run_model.py
89# Format for points easting,northing (no header)                   
90interior_regions_data = [['busselton_1km.csv', 500],
91                         ['bunbury_1km.csv', 500],
92                         ['busselton_2km.csv', 10000],
93                         ['bunbury_2km.csv', 10000],
94                         ['island1.csv', 10000],
95                         ['island2.csv', 10000],
96                         ['coast_5km_d20m.csv', 40000]]
97
98# LAND - used to set the initial stage/water to be offcoast only
99# Used in run_model.py.  Format for points easting,northing (no header)
100land_initial_conditions_filename = [['initial_condition_new.csv', 0],
101                                    ['initial_condition_marina.csv', 0]]
102
103# GAUGES - for creating timeseries at a specific point
104# Used in get_timeseries.py. 
105# Format easting,northing,name,elevation (with header)
106gauges_filename = 'MH_gauges2.csv'
107
108# BUILDINGS EXPOSURE - for identifying inundated houses
109# Used in run_building_inundation.py
110# Format latitude,longitude etc (geographic)
111building_exposure_filename = 'busselton_res_clip.csv' # from NEXIS
112
113# AREA OF IMAGES - Extent of each image to find out highest runup
114# Header - easting,northing,id,value
115# Used in get_runup.py
116images_filename = 'define_area_clip.csv'
117
118# BOUNDING POLYGON - used in build_boundary.py and run_model.py respectively
119# NOTE: when files are put together the points must be in sequence
120# For ease go clockwise!
121# Check the run_model.py for boundary_tags
122
123# Thinned ordering file from Hazard Map (geographic)
124# Format is index,latitude,longitude (with header)
125urs_order_filename = 'thinned_boundary_ordering_extend.csv'
126
127# Landward bounding points
128# Format easting,northing (no header)
129landward_boundary_filename = 'landward_boundary_new.csv'
130
131# MUX input filename.
132# If a meta-file from EventSelection is used, set 'multi-mux' to True.
133# If a single MUX stem filename (*.grd) is used, set 'multi-mux' to False.
134##mux_input_filename = event_number # to be found in event_folder
135                                    # (ie boundaries/event_number/)
136##multi_mux = False
137mux_input_filename = 'event.list'
138multi_mux = True
139
140#-------------------------------------------------------------------------------
141# Clipping regions for export to asc and regions for clipping data
142# Final inundation maps should only be created in regions of the finest mesh
143#-------------------------------------------------------------------------------
144
145# ASCII export grid for Busselton
146xminBusselton = 340000
147xmaxBusselton = 352000
148yminBusselton = 6271500
149ymaxBusselton = 6280000
150
151# ASCII export grid for Bunbury
152xminBunbury = 369000
153xmaxBunbury = 381000
154yminBunbury = 6308000
155ymaxBunbury = 6316500
156
157################################################################################
158################################################################################
159####         NOTE: NOTHING WOULD NORMALLY CHANGE BELOW THIS POINT.          ####
160################################################################################
161################################################################################
162
163# Get system user and host names.
164# These values can be used to distinguish between two similar runs by two
165# different users or runs by the same user on two different machines.
166user = get_user_name()
167host = get_host_name()
168
169# Environment variable names.
170# The inundation directory, not the data directory.
171ENV_INUNDATIONHOME = 'INUNDATIONHOME'
172
173# Path to MUX data
174ENV_MUXHOME = 'MUXHOME'
175
176#-------------------------------------------------------------------------------
177# Output Elevation Data
178#-------------------------------------------------------------------------------
179
180# Output filename for elevation
181# this is a combination of all the data generated in build_elevation.py
182combined_elevation_basename = scenario_name + '_combined_elevation'
183
184#-------------------------------------------------------------------------------
185# Directory Structure
186#-------------------------------------------------------------------------------
187
188# determines time for setting up output directories
189time = strftime('%Y%m%d_%H%M%S', localtime()) 
190gtime = strftime('%Y%m%d_%H%M%S', gmtime()) 
191build_time = time + '_build'
192run_time = time + '_run_'
193
194# create paths generated from environment variables.
195home = join(os.getenv(ENV_INUNDATIONHOME), 'data') # Absolute path for data folder
196muxhome = os.getenv(ENV_MUXHOME)
197   
198# check various directories/files that must exist
199anuga_folder = join(home, state, scenario_folder, 'anuga')
200topographies_folder = join(anuga_folder, 'topographies')
201polygons_folder = join(anuga_folder, 'polygons')
202boundaries_folder = join(anuga_folder, 'boundaries')
203output_folder = join(anuga_folder, 'outputs')
204gauges_folder = join(anuga_folder, 'gauges')
205event_folder = join(boundaries_folder, str(event_number))
206
207# MUX data files
208# Directory containing the MUX data files to be used with EventSelection.
209mux_data_folder = join(muxhome, 'mux')
210
211#-------------------------------------------------------------------------------
212# Location of input and output data
213#-------------------------------------------------------------------------------
214
215# Convert the user output_comment to a string for run_model.py
216output_comment = ('_'.join([str(x) for x in output_comment if x != user])
217                  + '_' + user)
218
219# The absolute pathname of the all elevation, generated in build_elevation.py
220combined_elevation = join(topographies_folder, combined_elevation_basename)
221
222# The pathname for the urs order points, used within build_urs_boundary.py
223if urs_order_filename:
224    urs_order = join(boundaries_folder, urs_order_filename)
225
226# The absolute pathname for the landward points of the bounding polygon,
227# Used within run_model.py)
228if landward_boundary_filename:
229    landward_boundary = join(boundaries_folder, landward_boundary_filename)
230
231# The absolute pathname for the .sts file, generated in build_boundary.py
232event_sts = join(event_folder, scenario_name)
233
234# The absolute pathname for the output folder names
235# Used for build_elevation.py
236output_build = join(output_folder, build_time) + '_' + str(user) 
237# Used for run_model.py
238output_run = join(output_folder, run_time) + output_comment
239# Used by post processing
240output_run_time = join(output_run, scenario_name) 
241
242# The absolute pathname of the mesh, generated in run_model.py
243meshes = join(output_run, scenario_name) + '.msh'
244
245# The absolute pathname for the gauges file
246# Used for get_timeseries.py
247if gauges_filename:
248    gauges = join(gauges_folder, gauges_filename)       
249
250# The absolute pathname for the building file
251# Used for run_building_inundation.py
252if building_exposure_filename:
253    building_exposure = join(gauges_folder, building_exposure_filename)
254
255# The absolute pathname for the image file
256# Used for get_runup.py
257if images_filename:
258    images = join(polygons_folder, images_filename)
259
260# full path to where MUX files (or meta-files) live
261mux_input = join(event_folder, mux_input_filename)
262
Note: See TracBrowser for help on using the repository browser.