source: anuga_work/production/hobart_2006/report/hobart_2006_report.tex @ 3763

% This is based on an automatically generated file (by make_report.py).
%
% Manual parts are:
% * an abstract must be written in abstract.tex
% * an introduction must be written in introduction.tex; a basic outline and
%   some of the core inputs are already in place
% * outline of the modelling methodology provided in modelling_methodology.tex
% * the tsunami-genic event should be discussed in tsunami_scenario.tex
% * an computational_setup.tex file needs to be written for the particular scenario
% * the interpretation of the results needs to be written to interpretation.tex
% * maximum inundation maps need to be included in HAT_map.tex and LAT_map.tex etc.
% * damage modelling maps need to be included in HAT_damage and LAT_damage etc.
% * a summary must be written into summary.tex
% * metadata for the scenario data to be included in metadata.tex

\documentclass{article}

\usepackage{ae} % or {zefonts}
\usepackage[T1]{fontenc}
\usepackage[ansinew]{inputenc}
\usepackage{amsmath}
\usepackage{amssymb}
\usepackage{graphicx}
\usepackage{color}
\usepackage[colorlinks]{hyperref}
\usepackage{lscape} %landcape pages support
\usepackage{setspace}
\usepackage{rotating}
\include{appendix}
\setstretch{1.25}
\topmargin 0pt
\oddsidemargin 0pt
\evensidemargin 0pt
\marginparwidth 0.5pt
\textwidth \paperwidth
\advance\textwidth -2in


\date{\today}
%\author{Geoscience Australia}

\begin{document}
\title{
\begin{figure}[hbt]
  \centerline{ \includegraphics[scale=0.4]{../report_figures/GAlogo.jpg}}
\end{figure}
Tsunami impact modelling for Tasmania: Hobart} 
  \maketitle

    \section{Executive Summary}
    \label{sec:execsum}
  \input{execsum}

  \tableofcontents
  
  \section{Introduction}
    \label{sec:intro}
  \input{introduction}

   \section{Modelling methodology}
    \label{sec:methodology}
    \input{modelling_methodology}
    
  %\section{Tsunami scenarios}
  %  \label{sec:tsunamiscenario}
  %  \input{tsunami_scenario}

  \section{Data sources}
    \label{sec:data}
    \input{data}
    
   \section{Inundation model}
    \label{sec:anuga}
    \input{anuga}
    \input{computational_setup}
        
  \section{Inundation modelling results}
     \label{sec:results}
         
\begin{table} \begin{center} 
\caption{Defined point locations for hobart study area.}
\label{table:locations}
\begin{tabular}{|l|l|l|l|}\hline
\bf{Point Name} & \bf{Easting} & \bf{Northing} & \bf{Elevation}\\ \hline
St10 & 540651.00 & 5236544.00 & 0.00 \\ \hline 
St12 & 534735.00 & 5234376.00 & 0.00 \\ \hline 
St13 & 533266.00 & 5237952.00 & 0.00 \\ \hline 
St24 & 526314.00 & 5205738.00 & 0.00 \\ \hline 
Kingston & 526581.00 & 5241268.00 & 0.00 \\ \hline 
HobartWarf & 527257.00 & 5251866.00 & 0.00 \\ \hline 
Oil & 526824.00 & 5255822.00 & 0.00 \\ \hline 
BelleriveBeach & 530798.00 & 5252544.00 & 0.00 \\ \hline 
St1 & 553902.00 & 5251497.00 & 0.00 \\ \hline 
St2 & 551643.00 & 5253212.00 & 0.00 \\ \hline 
D1 & 543176.00 & 5218136.00 & 0.00 \\ \hline 
D2 & 531296.00 & 5232876.00 & 0.00 \\ \hline 
D3 & 530050.00 & 5240869.00 & 0.00 \\ \hline 
D4 & 531150.00 & 5249083.00 & 0.00 \\ \hline 
D5 & 528297.00 & 5252936.00 & 0.00 \\ \hline 
D6 & 527685.00 & 5255201.00 & 0.00 \\ \hline 
\end{tabular} 
  \end{center} 
 \end{table} 
 
\begin{figure}[hbt] 
 \centerline{ \includegraphics[width=\paperwidth]{../report_figures/hobart_gauge.jpg}}
\caption{Point locations used for Hobart study.}  
\label{fig:points}
\end{figure}
\input{interpretation} 
\input{mw87_map} 
 \clearpage 
 
\input{mw85_map} 
 \clearpage 
 

  % \section{Impact due to data accuracy}
  %   \input{discussion}
  %   \label{sec:issues}

     \section{Summary}
     \label{sec:summary}
     \input{summary}

     \section{Acknowledgements}
     \input{acknowledgements}
     
    \input{references}

    \appendix
    
   \section{Metadata}
     \label{sec:metadata}
     \input{metadata}

\pagebreak

   \section{Time series}
     \label{sec:timeseries}
\input{latexoutput} 
 \clearpage 
 


%\pagebreak

 %  \section{Damage modelling inputs}
 %    \label{sec:damageinputs}
 %    \input{damage_inputs}

\end{document}