1 | import anuga |
---|
2 | import numpy as num |
---|
3 | import math |
---|
4 | import inlet |
---|
5 | |
---|
6 | from anuga.utilities.system_tools import log_to_file |
---|
7 | |
---|
8 | |
---|
9 | class Structure_operator: |
---|
10 | """Structure Operator - transfer water from one rectangular box to another. |
---|
11 | Sets up the geometry of problem |
---|
12 | |
---|
13 | This is the base class for structures (culverts, pipes, bridges etc). Inherit from this class (and overwrite |
---|
14 | discharge_routine method for specific subclasses) |
---|
15 | |
---|
16 | Input: Two points, pipe_size (either diameter or width, height), |
---|
17 | mannings_rougness, |
---|
18 | """ |
---|
19 | |
---|
20 | counter = 0 |
---|
21 | |
---|
22 | def __init__(self, |
---|
23 | domain, |
---|
24 | end_point0, |
---|
25 | end_point1, |
---|
26 | width, |
---|
27 | height, |
---|
28 | apron, |
---|
29 | manning, |
---|
30 | enquiry_gap, |
---|
31 | description, |
---|
32 | label, |
---|
33 | structure_type, |
---|
34 | logging, |
---|
35 | verbose): |
---|
36 | |
---|
37 | self.domain = domain |
---|
38 | self.domain.set_fractional_step_operator(self) |
---|
39 | self.end_points = [end_point0, end_point1] |
---|
40 | |
---|
41 | |
---|
42 | |
---|
43 | if height is None: |
---|
44 | height = width |
---|
45 | |
---|
46 | if apron is None: |
---|
47 | apron = width |
---|
48 | |
---|
49 | self.width = width |
---|
50 | self.height = height |
---|
51 | self.apron = apron |
---|
52 | self.manning = manning |
---|
53 | self.enquiry_gap = enquiry_gap |
---|
54 | |
---|
55 | if description == None: |
---|
56 | self.description = ' ' |
---|
57 | else: |
---|
58 | self.description = description |
---|
59 | |
---|
60 | |
---|
61 | if label == None: |
---|
62 | self.label = "structure_%g" % Structure_operator.counter |
---|
63 | else: |
---|
64 | self.label = label |
---|
65 | print label |
---|
66 | |
---|
67 | if structure_type == None: |
---|
68 | self.structure_type = 'generic structure' |
---|
69 | else: |
---|
70 | self.structure_type = structure_type |
---|
71 | |
---|
72 | self.verbose = verbose |
---|
73 | |
---|
74 | |
---|
75 | |
---|
76 | # Keep count of structures |
---|
77 | Structure_operator.counter += 1 |
---|
78 | |
---|
79 | # Slots for recording current statistics |
---|
80 | self.discharge = 0.0 |
---|
81 | self.velocity = 0.0 |
---|
82 | self.delta_total_energy = 0.0 |
---|
83 | self.driving_energy = 0.0 |
---|
84 | |
---|
85 | self.__create_exchange_polygons() |
---|
86 | |
---|
87 | self.inlets = [] |
---|
88 | polygon0 = self.inlet_polygons[0] |
---|
89 | enquiry_point0 = self.inlet_equiry_points[0] |
---|
90 | outward_vector0 = self.culvert_vector |
---|
91 | self.inlets.append(inlet.Inlet(self.domain, polygon0, enquiry_point0, outward_vector0)) |
---|
92 | |
---|
93 | polygon1 = self.inlet_polygons[1] |
---|
94 | exchange_polygon1 = self.inlet_equiry_points[1] |
---|
95 | outward_vector1 = - self.culvert_vector |
---|
96 | self.inlets.append(inlet.Inlet(self.domain, polygon1, exchange_polygon1, outward_vector1)) |
---|
97 | |
---|
98 | self.set_logging(logging) |
---|
99 | |
---|
100 | def __call__(self): |
---|
101 | |
---|
102 | timestep = self.domain.get_timestep() |
---|
103 | |
---|
104 | self.__determine_inflow_outflow() |
---|
105 | |
---|
106 | Q, barrel_speed, outlet_depth = self.discharge_routine() |
---|
107 | |
---|
108 | old_inflow_height = self.inflow.get_average_height() |
---|
109 | old_inflow_xmom = self.inflow.get_average_xmom() |
---|
110 | old_inflow_ymom = self.inflow.get_average_ymom() |
---|
111 | |
---|
112 | if old_inflow_height > 0.0 : |
---|
113 | Q_star = Q/old_inflow_height |
---|
114 | else: |
---|
115 | Q_star = 0.0 |
---|
116 | |
---|
117 | factor = 1.0/(1.0 + Q_star*timestep/self.inflow.get_area()) |
---|
118 | |
---|
119 | new_inflow_height = old_inflow_height*factor |
---|
120 | new_inflow_xmom = old_inflow_xmom*factor |
---|
121 | new_inflow_ymom = old_inflow_ymom*factor |
---|
122 | |
---|
123 | self.inflow.set_heights(new_inflow_height) |
---|
124 | |
---|
125 | #inflow.set_xmoms(Q/inflow.get_area()) |
---|
126 | #inflow.set_ymoms(0.0) |
---|
127 | |
---|
128 | self.inflow.set_xmoms(new_inflow_xmom) |
---|
129 | self.inflow.set_ymoms(new_inflow_ymom) |
---|
130 | |
---|
131 | loss = (old_inflow_height - new_inflow_height)*self.inflow.get_area() |
---|
132 | |
---|
133 | # set outflow |
---|
134 | if old_inflow_height > 0.0 : |
---|
135 | timestep_star = timestep*new_inflow_height/old_inflow_height |
---|
136 | else: |
---|
137 | timestep_star = 0.0 |
---|
138 | |
---|
139 | outflow_extra_height = Q*timestep_star/self.outflow.get_area() |
---|
140 | outflow_direction = - self.outflow.outward_culvert_vector |
---|
141 | outflow_extra_momentum = outflow_extra_height*barrel_speed*outflow_direction |
---|
142 | |
---|
143 | gain = outflow_extra_height*self.outflow.get_area() |
---|
144 | |
---|
145 | #print Q, Q*timestep, barrel_speed, outlet_depth, Qstar, factor, timestep_star |
---|
146 | #print ' ', loss, gain |
---|
147 | |
---|
148 | # Stats |
---|
149 | self.discharge = Q#outflow_extra_height*self.outflow.get_area()/timestep |
---|
150 | self.velocity = barrel_speed#self.discharge/outlet_depth/self.width |
---|
151 | |
---|
152 | new_outflow_height = self.outflow.get_average_height() + outflow_extra_height |
---|
153 | |
---|
154 | if self.use_momentum_jet : |
---|
155 | # FIXME (SR) Review momentum to account for possible hydraulic jumps at outlet |
---|
156 | #new_outflow_xmom = outflow.get_average_xmom() + outflow_extra_momentum[0] |
---|
157 | #new_outflow_ymom = outflow.get_average_ymom() + outflow_extra_momentum[1] |
---|
158 | |
---|
159 | new_outflow_xmom = barrel_speed*new_outflow_height*outflow_direction[0] |
---|
160 | new_outflow_ymom = barrel_speed*new_outflow_height*outflow_direction[1] |
---|
161 | |
---|
162 | else: |
---|
163 | #new_outflow_xmom = outflow.get_average_xmom() |
---|
164 | #new_outflow_ymom = outflow.get_average_ymom() |
---|
165 | |
---|
166 | new_outflow_xmom = 0.0 |
---|
167 | new_outflow_ymom = 0.0 |
---|
168 | |
---|
169 | self.outflow.set_heights(new_outflow_height) |
---|
170 | self.outflow.set_xmoms(new_outflow_xmom) |
---|
171 | self.outflow.set_ymoms(new_outflow_ymom) |
---|
172 | |
---|
173 | |
---|
174 | def __determine_inflow_outflow(self): |
---|
175 | # Determine flow direction based on total energy difference |
---|
176 | |
---|
177 | if self.use_velocity_head: |
---|
178 | self.delta_total_energy = self.inlets[0].get_enquiry_total_energy() - self.inlets[1].get_enquiry_total_energy() |
---|
179 | else: |
---|
180 | self.delta_total_energy = self.inlets[0].get_enquiry_stage() - self.inlets[1].get_enquiry_stage() |
---|
181 | |
---|
182 | |
---|
183 | self.inflow = self.inlets[0] |
---|
184 | self.outflow = self.inlets[1] |
---|
185 | |
---|
186 | |
---|
187 | if self.delta_total_energy < 0: |
---|
188 | self.inflow = self.inlets[1] |
---|
189 | self.outflow = self.inlets[0] |
---|
190 | self.delta_total_energy = -self.delta_total_energy |
---|
191 | |
---|
192 | |
---|
193 | def __create_exchange_polygons(self): |
---|
194 | |
---|
195 | """Create polygons at the end of a culvert inlet and outlet. |
---|
196 | At either end two polygons will be created; one for the actual flow to pass through and one a little further away |
---|
197 | for enquiring the total energy at both ends of the culvert and transferring flow. |
---|
198 | """ |
---|
199 | |
---|
200 | # Calculate geometry |
---|
201 | x0, y0 = self.end_points[0] |
---|
202 | x1, y1 = self.end_points[1] |
---|
203 | |
---|
204 | dx = x1 - x0 |
---|
205 | dy = y1 - y0 |
---|
206 | |
---|
207 | self.culvert_vector = num.array([dx, dy]) |
---|
208 | self.culvert_length = math.sqrt(num.sum(self.culvert_vector**2)) |
---|
209 | assert self.culvert_length > 0.0, 'The length of culvert is less than 0' |
---|
210 | |
---|
211 | # Unit direction vector and normal |
---|
212 | self.culvert_vector /= self.culvert_length # Unit vector in culvert direction |
---|
213 | self.culvert_normal = num.array([-dy, dx])/self.culvert_length # Normal vector |
---|
214 | |
---|
215 | # Short hands |
---|
216 | w = 0.5*self.width*self.culvert_normal # Perpendicular vector of 1/2 width |
---|
217 | h = self.apron*self.culvert_vector # Vector of length=height in the |
---|
218 | # direction of the culvert |
---|
219 | |
---|
220 | gap = (1 + self.enquiry_gap)*h |
---|
221 | |
---|
222 | self.inlet_polygons = [] |
---|
223 | self.inlet_equiry_points = [] |
---|
224 | |
---|
225 | # Build exchange polygon and enquiry point |
---|
226 | for i in [0, 1]: |
---|
227 | i0 = (2*i-1) |
---|
228 | p0 = self.end_points[i] + w |
---|
229 | p1 = self.end_points[i] - w |
---|
230 | p2 = p1 + i0*h |
---|
231 | p3 = p0 + i0*h |
---|
232 | ep = self.end_points[i] + i0*gap |
---|
233 | |
---|
234 | self.inlet_polygons.append(num.array([p0, p1, p2, p3])) |
---|
235 | self.inlet_equiry_points.append(ep) |
---|
236 | |
---|
237 | # Check that enquiry points are outside inlet polygons |
---|
238 | for i in [0,1]: |
---|
239 | polygon = self.inlet_polygons[i] |
---|
240 | ep = self.inlet_equiry_points[i] |
---|
241 | |
---|
242 | area = anuga.polygon_area(polygon) |
---|
243 | |
---|
244 | msg = 'Polygon %s ' %(polygon) |
---|
245 | msg += ' has area = %f' % area |
---|
246 | assert area > 0.0, msg |
---|
247 | |
---|
248 | msg = 'Enquiry point falls inside an exchange polygon.' |
---|
249 | assert not anuga.inside_polygon(ep, polygon), msg |
---|
250 | |
---|
251 | |
---|
252 | def discharge_routine(self): |
---|
253 | |
---|
254 | pass |
---|
255 | |
---|
256 | |
---|
257 | def structure_statistics(self): |
---|
258 | |
---|
259 | |
---|
260 | message = '=====================================\n' |
---|
261 | message += 'Structure Operator: %s\n' % self.label |
---|
262 | message += '=====================================\n' |
---|
263 | |
---|
264 | message += 'Structure Type: %s\n' % self.structure_type |
---|
265 | |
---|
266 | message += 'Description\n' |
---|
267 | message += '%s' % self.description |
---|
268 | message += '\n' |
---|
269 | |
---|
270 | for i, inlet in enumerate(self.inlets): |
---|
271 | message += '-------------------------------------\n' |
---|
272 | message += 'Inlet %i\n' % i |
---|
273 | message += '-------------------------------------\n' |
---|
274 | |
---|
275 | message += 'inlet triangle indices and centres\n' |
---|
276 | message += '%s' % inlet.triangle_indices |
---|
277 | message += '\n' |
---|
278 | |
---|
279 | message += '%s' % self.domain.get_centroid_coordinates()[inlet.triangle_indices] |
---|
280 | message += '\n' |
---|
281 | |
---|
282 | message += 'polygon\n' |
---|
283 | message += '%s' % inlet.polygon |
---|
284 | message += '\n' |
---|
285 | |
---|
286 | message += '=====================================\n' |
---|
287 | |
---|
288 | return message |
---|
289 | |
---|
290 | |
---|
291 | def print_structure_statistics(self): |
---|
292 | |
---|
293 | print self.structure_statistics() |
---|
294 | |
---|
295 | |
---|
296 | def print_timestepping_statistics(self): |
---|
297 | |
---|
298 | message = '---------------------------\n' |
---|
299 | message += 'Structure report for %s:\n' % self.label |
---|
300 | message += '--------------------------\n' |
---|
301 | message += 'Type: %s\n' % self.structure_type |
---|
302 | message += 'Discharge [m^3/s]: %.2f\n' % self.discharge |
---|
303 | message += 'Velocity [m/s]: %.2f\n' % self.velocity |
---|
304 | message += 'Inlet Driving Energy %.2f\n' % self.driving_energy |
---|
305 | message += 'delta total energy %.2f\n' % self.delta_total_energy |
---|
306 | |
---|
307 | print message |
---|
308 | |
---|
309 | |
---|
310 | def set_logging(self, flag=True): |
---|
311 | |
---|
312 | self.logging = flag |
---|
313 | |
---|
314 | # If flag is true open file with mode = "w" to form a clean file for logging |
---|
315 | if self.logging: |
---|
316 | self.log_filename = self.label + '.log' |
---|
317 | log_to_file(self.log_filename, self.structure_statistics(), mode='w') |
---|
318 | log_to_file(self.log_filename, 'time,discharge,velocity,driving_energy,delta_total_energy') |
---|
319 | |
---|
320 | #log_to_file(self.log_filename, self.culvert_type) |
---|
321 | |
---|
322 | |
---|
323 | def timestepping_statistics(self): |
---|
324 | |
---|
325 | message = '%.5f, ' % self.domain.get_time() |
---|
326 | message += '%.5f, ' % self.discharge |
---|
327 | message += '%.5f, ' % self.velocity |
---|
328 | message += '%.5f, ' % self.driving_energy |
---|
329 | message += '%.5f' % self.delta_total_energy |
---|
330 | |
---|
331 | return message |
---|
332 | |
---|
333 | def log_timestepping_statistics(self): |
---|
334 | |
---|
335 | if self.logging: |
---|
336 | log_to_file(self.log_filename, self.timestepping_statistics()) |
---|
337 | |
---|
338 | |
---|
339 | def get_inlets(self): |
---|
340 | |
---|
341 | return self.inlets |
---|
342 | |
---|
343 | |
---|
344 | def get_culvert_length(self): |
---|
345 | |
---|
346 | return self.culvert_length |
---|
347 | |
---|
348 | |
---|
349 | def get_culvert_width(self): |
---|
350 | |
---|
351 | return self.width |
---|
352 | |
---|
353 | |
---|
354 | def get_culvert_diameter(self): |
---|
355 | |
---|
356 | return self.width |
---|
357 | |
---|
358 | |
---|
359 | def get_culvert_height(self): |
---|
360 | |
---|
361 | return self.height |
---|
362 | |
---|
363 | |
---|
364 | def get_culvert_apron(self): |
---|
365 | |
---|
366 | return self.apron |
---|