Changeset 2834

Timestamp:

May 8, 2006, 4:51:28 PM (19 years ago)

Author:

sexton

Message:

updates

Location:

production/onslow_2006

Files:

• data.tex (modified) (3 diffs)
• introduction.tex (modified) (1 diff)
• make_report.py (modified) (1 diff)
• results.tex (modified) (3 diffs)

production/onslow_2006/data.tex

@@ -9 +9 @@
 including the cell resolution.
 
-A number of sources have supplied data for these two studies. With
+A number of sources have supplied data for this study. With
 respect to the onshore data, the Defence Imagery and Geospatial
 Organisation (DIGO) supplied the DTED (Digital Terrain Elevation
@@ -50 +50 @@
 The extent of the
 data used for the tsunami impact modelling can be seen in the
-following two figures.
+following two figure.
 
 \begin{figure}[hbt]
@@ -60 +60 @@
 \end{figure}
 
-\begin{figure}[hbt]
-
-  %\centerline{ \includegraphics[width=75mm, height=75mm]{figures/.eps}}
-
-  \caption{Data extent for Pt Hedland scenario}
-  \label{fig:pt_hedland_data_area}
-\end{figure}
 
 Section \ref{sec:metadata} outlines the metadata for data used for
-these studies.
+this study.
 
 

production/onslow_2006/introduction.tex

@@ -38 +38 @@
 \end{itemize}
 
-The inundation results for the two scenarios are described in section
+The inundation results for the Onslow area is described in section
 \ref{sec:results}.

production/onslow_2006/make_report.py

@@ -128 +128 @@
 
 for i in range(len(latex_output)):
-    if i == 0: s = '\subsection(Highest Astronomical Tide) \n'
-    if i == 1: s = '\subsection(Lowest Astronomical Tide) \n'
-    if i == 2: s = '\subsection() \n'
+    if i == 0: s = '\subsection{Highest Astronomical Tide} \n'
+    if i == 1: s = '\subsection{Lowest Astronomical Tide} \n'
+    if i == 2: s = '\subsection{} \n'
     fid.write(s)
-    s = '\input{%s} \n' %latex_output[i]
+    #filename = latex_output[i]
+    #s = '\input{%s} \n' %filename.replace('_','')
+    s = '\input{%s} \n \clearpage \n' %latex_output[i]
     fid.write(s)
 

production/onslow_2006/results.tex

@@ -3 +3 @@
 computational time and desired resolution in areas of interest,
 particularly in the interface between the on and offshore. The
-following series of figures illustrate the study extent for the two
-scenarios and the resulting computational mesh, highlighting areas
+following series of figures illustrate the study extent for the 
+scenario and the resulting computational mesh, highlighting areas
 of refinement around areas of particular interest.
 
@@ -11 +11 @@
   %\centerline{ \includegraphics[width=75mm, height=75mm]{figures/.eps}}
 
-  \caption{Study area for scenario 1: Onslow}
+  \caption{Study area for Onslow scenario}
   \label{fig:onslow_area}
 \end{figure}
@@ -24 +24 @@
 \end{figure}
 
-\begin{figure}[hbt]
-
-  %\centerline{ \includegraphics[width=75mm, height=75mm]{figures/.eps}}
-
-  \caption{Study area for scenario 2: Pt Hedland}
-  \label{fig:pt_hedland_area}
-\end{figure}
-
-
-\begin{figure}[hbt]
-
-  %\centerline{ \includegraphics[width=75mm, height=75mm]{figures/.eps}}
-
-  \caption{Computational mesh for Pt Hedland study area}
-  \label{fig:mesh_pthedland}
-\end{figure}