Changeset 3729


Ignore:
Timestamp:
Oct 10, 2006, 1:31:27 PM (18 years ago)
Author:
sexton
Message:

tex updates

Location:
anuga_work/production/hobart_2006/report
Files:
4 edited

Legend:

Unmodified
Added
Removed
  • anuga_work/production/hobart_2006/report/computational_setup.tex

    r3721 r3729  
    2828%There are no gains in choosing the area to be less than the supporting data.
    2929Figure \ref{fig:onslow_area} shows the study area with regions of difference cell areas. The total number
    30 of cells is \?.
     30of cells is ?.
    3131Lateral accuracy refers to the distance at which we are confident in stating a region is inundated.
    3232Figure \ref{fig:hobart_area} shows the maximum triangular cell area and lateral accuracy for each region.
  • anuga_work/production/hobart_2006/report/hobart_2006_report.tex

    r3728 r3729  
    105105 
    106106\begin{figure}[hbt]
    107  \centerline{ \includegraphics[width=\paperwidth]{../report_figures/hobart_gauge.jpg}}
     107% \centerline{ \includegraphics[width=\paperwidth]{../report_figures/hobart_gauge.jpg}}
    108108\caption{Point locations used for Hobart study.} 
    109109\label{fig:points}
  • anuga_work/production/hobart_2006/report/mw85_map.tex

    r3721 r3729  
    11\begin{sidewaysfigure}
    2 \centerline{ \includegraphics[width=\paperwidth]{../report_figures/mw85.jpg}}
     2%\centerline{ \includegraphics[width=\paperwidth]{../report_figures/mw85.jpg}}
    33\caption{Maximum inundation map for the Mw 8.7 scenario for South East Tasmania.
    44Data: TAS DPIW, UTAS and Hobart Port Authority and AHO.} 
  • anuga_work/production/hobart_2006/report/mw87_map.tex

    r3721 r3729  
    1 \begin{sidewaysfigure}\centerline{ \includegraphics[width=\paperwidth]{../report_figures/mw87.jpg}}
     1\begin{sidewaysfigure}
     2%\centerline{ \includegraphics[width=\paperwidth]{../report_figures/mw87.jpg}}
    23\caption{Maximum inundation map for the Mw 8.7 scenario for South East Tasmania.
    34Data: TAS DPIW, UTAS and Hobart Port Authority and AHO.} 
Note: See TracChangeset for help on using the changeset viewer.