Ignore:
Timestamp:
Nov 27, 2007, 4:18:39 PM (17 years ago)
Author:
sexton
Message:

rename plot_polygons_points to original name of plot_polygons

File:
1 edited

Legend:

Unmodified
Added
Removed

  • anuga_work/production/dampier_2006/report/anuga_setup.tex

    r4479 r4856  
    3838
    3939
    40 \begin{figure}[hbt]
     40\begin{figure}[h]
    4141
    42   \centerline{ \includegraphics[scale=0.5]{../report_figures/dampier_model.jpg}}
    43 
     42  %\centerline{ \includegraphics[scale=0.5]{../report_figures/dampier_model.jpg}}
     43  \centerline{ \includegraphics[scale=0.3]{../report_figures/model.jpg}}
     44 
    4445  \caption{Study area for Dampier scenario highlighting four regions of increased refinement.
    45 Region 1: Surrounds onshore gas infrastructure at Dampier with a cell area of 500 m$^2$ (lateral accuracy 30 m) - not shown here.
     46Region 1: Surrounds onshore gas infrastructure at Dampier with a cell area of 500 m$^2$ (lateral accuracy 30 m).
    4647Region 2: Surrounds the gas pipelines with a cell area of 2000 m$^2$ (lateral accuracy 100 m).
    4748Region 3: Surrounds the coastal regions with a cell area of 10000 m$^2$ (lateral accuracy  m).
    … …  
    7071results are therefore likely to be over estimates.
    7172
    72 The following table summarises the modelling parameters;
    73 
    74 
    75 \begin{table}
    76 \begin{center}
    77 \caption{Parameters used in ANUGA for the Dampier scenario.}
    78 \begin{tabular}{|l|l|l|}\hline
    79 Mesh & & \\ \hline
    80 & resolution in Region 1 & 500 m$^2$  \\ \hline
    81 & resolution in Region 2 & 2000 m$^2$ \\ \hline
    82 & resolution in Region 3 & 2000 m$^2$ \\ \hline
    83 & remaining resolution & 100 000 m$^2$ \\ \hline
    84 Model parameters & & \\ \hline
    85 & friction & 0 \\ \hline
    86 & minimum stored height & 0.1 m \\ \hline
    87 \end{tabular}
    88 \end{center}
    89 \end{table}
     73%The following table summarises the modelling parameters;
     74%
     75%\begin{table}
     76%\begin{center}
     77%\caption{Parameters used in ANUGA for the Dampier scenario.}
     78%\begin{tabular}{|l|l|l|}\hline
     79%Mesh & & \\ \hline
     80%& resolution in Region 1 & 500 m$^2$  \\ \hline
     81%& resolution in Region 2 & 2000 m$^2$ \\ \hline
     82%& resolution in Region 3 & 2000 m$^2$ \\ \hline
     83%& remaining resolution & 100 000 m$^2$ \\ \hline
     84%Model parameters & & \\ \hline
     85%& friction & 0 \\ \hline
     86%& minimum stored height & 0.1 m \\ \hline
     87%\end{tabular}
     88%\end{center}
     89%\end{table}
Note: See TracChangeset for help on using the changeset viewer.