Index: DVD_images/extra_files/BatemansBay/index.html
===================================================================
--- DVD_images/extra_files/BatemansBay/index.html	(revision 7265)
+++ DVD_images/extra_files/BatemansBay/index.html	(revision 7300)
@@ -34,136 +34,30 @@
   software necessary to reproduce and potentially augment the models underpinning the report. This will allow the Jurisdiction
   to rerun the models with minor modifications or new elevation data as needed and also potentially replicate the methodology
-  to other locations if desired.  
+  to other locations within the model extent, if desired.  
   <p>
   The data provided on this DVD is:
   <ul>
-    <li> The Professional Opinion Report 2009/XX entitled <i>Capacity Building for Tsunami Planning and Preparation: 
-         Inundation Models for Four East Coast Australian Communities</i>
-    <li> Elevation data used with the tsunami inundation model
-    <li> Input data for a range of tsunami events
+    <li> The Professional Opinion Report 2009/XX entitled <blink><i><a href="documents/not_there.pdf">Capacity Building for Tsunami Planning and Preparation: 
+         Inundation Models for Four East Coast Australian Communities</a> <b><font color="red">UNFINISHED</font></b></i></blink>
+    <li>  <a href="documents/Figures">Figures</a> of maximum inundation and maximum speed
+    <li> Generated <a href="data/new_south_wales/batemans_bay_tsunami_scenario_2009/anuga/outputs">Arc grids</a> of maximum inundation and maximum speed for the areas of interest
+    <li> Generated <a href="data/new_south_wales/batemans_bay_tsunami_scenario_2009/anuga/outputs">timeseries</a> from the models 
+    <li> Combined <a href="data/new_south_wales/batemans_bay_tsunami_scenario_2009/anuga/topographies">elevation data</a> used by the simulation
+    <li> The <a href="data/new_south_wales/batemans_bay_tsunami_scenario_2009/anuga/outputs/elevation">Arc grid</a> of the resulting elevation generated by ANUGA
     <li> The Python scripts used to run the models
   </ul>
   <p>
-  The input wave data on this disk are all derived from events available in the Australian Tsunami
+  The tsunami wave data on this disk are all derived from events available in the Australian Tsunami
   Hazard Map. As this dataset is very large, this DVD only contains the events
   described in the report.
 
-  <a name="requirements"><h3><b>Requirements</b></h3></a>
+  <a name="requirements"><h3><b>Report Figures</b></h3></a>
 
-  The tsunami inundation simulations are based on the Open Source software package called ANUGA.
-  For more information about ANUGA visit <a href="https://datamining.anu.edu.au/anuga">https://datamining.anu.edu.au/anuga</a>. 
-  <p>
-  ANUGA has been developed and tested under the Windows XP and Linux (Ubuntu, Mint and Red Hat) operating systems.  
-  ANUGA may also be installed on a Windows Vista system and Debian Linux, but these have not been extensively tested.
-  <p>
-  The ANUGA scripts on this DVD require a minimum of 3GB of memory and possibly more, if mesh resolutions are increased. For this reason
-  we recommend using 64 bit Ubuntu Linux as this operating system can use more than 3GB of memory, whereas Windows XP cannot.
+  The figures from the report may be found <a href="documents/Figures">here</a>.
 
-  <a name="installing"><h3><b>Installing ANUGA</b></h3></a>
+  <a name="installation"><h3><b>Simulation Installation and Usage</b></h3></a>
 
-  You must install ANUGA according to the <a href="documents/anuga_installation_guide.pdf">Installation Guide</a>.
-  As the installation procedure comprises a number of steps we suggest that it is carried out by someone with a
-  basic understanding of how to install software packages on the operating system of choice. 
+  Information for installing and using the simulation is <a href="installation.html">here</a>.
 
-  <a name="simulating"><h3><b>How to run a simulation</b></h3></a>
-
-  This is how you should run the model on this DVD.
-  We assume that you are using Windows and will give examples for that operating system.
-  The translation to Linux should be obvious, but the <a href="#userslist">ANUGA user's mailing list</a>
-  can be used to get help.
-  <p>
-  
-  <p>
-  <hr align="left" width="100">
-  <p>
-  First, it is assumed you have installed the ANUGA software according to the
-  <a href="documents/anuga_installation_guide.pdf">Installation Guide</a>.
-  <p>
-  <hr align="left" width="100">
-  <p>
-  Next, you must copy the entire contents of the DVD to a place in your filesystem. Let's assume
-  that you want to put the data into <b>C:\ANUGA</b>. You would do this in a Command Prompt window:
-  <table class="code"><tr><td>
-    C:<br>
-    cd \<br>
-    mkdir ANUGA<br>
-    xcopy /e X:\ ANUGA
-  </td></tr></table>
-  <p>
-  Of course, you could just drag all files on the DVD (X:\ is the assumed drive letter) to the desired target directory with Explorer.
-  <p>
-  <hr align="left" width="100">
-  <p>
-  Now you must create an environment variable <b>ANUGADATA</b> that points to the directory you just created:
-  <table class="code"><tr><td>
-    set ANUGADATA=C:\ANUGA
-  </td></tr></table>
-  <p>
-  Doing the above in a Command Prompt window is temporary - if you open another
-  window you will not have the ANUGADATA environment variable defined. To make
-  the variable permanent you must set it in the <b>Start|Settings|Control Panel|System</b>
-  tool (<b>Advanced</b> tab).  See the <a href="documents/anuga_installation_guide.pdf">Installation Guide</a>
-  if you don't know how to do this.
-  <p>
-  <hr align="left" width="100">
-  <p>
-  Next, you prepare and execute the model:
-  <table class="code"><tr><td>
-    cd C:\ANUGA<br>
-    cd project<br>
-    python setup_model.py<br >
-    python run_model.py
-  </td></tr></table>
-  <p>
-  <hr align="left" width="100">
-  <p>
-  This should all run to completion though it may take several days, depending on
-  the hardware used.
-  <p>
-  If you get an error from <font color="red">setup_model.py</font>
-  or <font color="red">run_model.py</font> look for some explanation in the log
-  files, which you will find under <b>C:\ANUGA\data</b>. Just keep
-  drilling down from that point until you find a directory called <b>outputs</b>.
-  The latest directory in <b>outputs</b> should contain a file called <font color="red">screen_error.txt</font>
-  with an explanation of the error at the end. 
-  <p>
-  Once the simulation has completed you may view the results using the ANUGA
-  viewer as described in the <a href="documents/anuga_installation_guide.pdf">Installation Guide</a> 
-  and <a href="documents/anuga_user_manual.pdf">User Manual</a>.  You may also
-  generate rasters suitable for GIS mapping or write dedicated scripts extracting timeseries at selected
-  locations.  Some hints to help you do this are at the <a href="analysis.html">analysis page</a>.
-  <p>
-  The ANUGA <a href="documents/anuga_user_manual.pdf">User Manual</a> describes
-  how to use the ANUGA system in general and provides some examples of its use.
-
-  <a name="auxscripts"><h3><b>How to extract data from the simulation output files</b></h3></a>
-
-  After you have run a simulation you may wish to extract information from the generated SWW file.
-  On this disk there are a selection of example analysis scripts that you can use or modify.
-  The <a href="analysis.html">analysis scripts</a> page explains how to use the scripts.
-
-  <a name="modifications"><h3><b>How to modify a simulation</b></h3></a>
-
-  After you have run the supplied simulation you may wish to change it in some way, such as adding improved bathymetry data, for example.
-  The <a href="modifications.html">modifications</a> page explains how to do this.
-
-  <a name="userslist"><h3><b>How to join the ANUGA user's mailing list</b></h3></a>
-
-  One of the quickest ways to get your ANUGA questions answered is by asking them on the <b>ANUGA-user</b> mailing list.
-  You can <a href="https://lists.sourceforge.net/lists/listinfo/anuga-user">subscribe to the list</a>
-  and can view the mailing list <a href="https://sourceforge.net/mailarchive/forum.php?forum_name=anuga-user">archives</a>.
-  <p>
-  It costs nothing to register and you can choose to have list mail sent to you as individual emails or have them batched
-  into a few emails per day.  You can unsubscribe at any time through the subscribe link above.
-
-  <a name="FAQ"><h3><b>Frequently Asked Questions</b></h3></a>
-
-  There is a <b>Frequently Asked Questions</b> (FAQ) page at
-  <a href="https://datamining.anu.edu.au/anuga/wiki/FrequentlyAskedQuestions">https://datamining.anu.edu.au/anuga/wiki/FrequentlyAskedQuestions</a>.
-  Look in there and search the mailing list archives before asking questions on the ANUGA user's mailing list.
-  Someone may already have asked your question!
-  <p>
-  Note that you can edit the FAQ pages, so it is helpful if you can update the FAQ with your question and its answer if you feel
-  it would be helpful to others.
 </body>
 </html>
