Changeset 7467 for anuga_work/publications/boxing_day_validation_2008/appendix.tex

Timestamp:

Sep 2, 2009, 5:03:04 PM (14 years ago)

Author:

ole

Message:

Added new speed images from Kristy and added reference to NOAA data

File:

• anuga_work/publications/boxing_day_validation_2008/appendix.tex (modified) (3 diffs)

anuga_work/publications/boxing_day_validation_2008/appendix.tex

@@ -37 +37 @@
 \end{figure}
 
-%\begin{figure}[ht]
-%\begin{center}
-%\includegraphics[width=6cm,keepaspectratio=true]{figures/sensitivity_f0_0003_speed}
-%\includegraphics[width=6cm,keepaspectratio=true]{figures/sensitivity_f0_03_speed}
-%\caption{The maximal flow speeds for the same model parameterisations
-%  found in Figure \protect \ref{fig:sensitivity_friction}. The
-%  reference flow speeds are shown in Figure \protect
-%  \ref{fig:reference_model} (right).}
-%\label{fig:sensitivity_friction_speed}
-%\end{center}
-%\end{figure}
-% John: I do not think we need to show sensitivity to flow speeds
+\begin{figure}[ht]
+\begin{center}
+\includegraphics[width=\textwidth,keepaspectratio=true]{figures/sensitivity_friction_speed}
+\caption{The maximal flow speeds for the same model parameterisations
+  found in Figure \protect \ref{fig:sensitivity_friction}.}
+\label{fig:sensitivity_friction_speed}
+\end{center}
+\end{figure}
 
 
 \begin{figure}[ht]
 \begin{center}
-%\includegraphics[width=6cm,keepaspectratio=true]{sensitivity_minus10cm_depth}
-%\includegraphics[width=6cm,keepaspectratio=true]{sensitivity_plus10cm_depth}
 \includegraphics[width=\textwidth,keepaspectratio=true]{figures/sensitivity_boundary_wave}
 \caption{Model results with wave height at \textsc{anuga} boundary artificially
   modified to assess sensitivities. 
   The reference inundation extent is shown in Figure
-  \protect \ref{fig:reference_model} (left).  The left and right images 
+  \protect \ref{fig:reference_model} (left). The left and right images 
   show the inundation results if the wave at the \textsc{anuga} boundary
   is reduced or increased by 10 cm respectively. The inundation
@@ -68 +62 @@
 \end{center}
 \end{figure}
-FIXME (Jane): How and why was the +/- 10 cm chosen?
 
 
-%\begin{figure}[ht]
-%\begin{center}
-%\includegraphics[width=6cm,keepaspectratio=true]{figures/sensitivity_minus10cm_speed}
-%\includegraphics[width=6cm,keepaspectratio=true]{figures/sensitivity_plus10cm_speed}
-%\caption{The maximal flow speeds for the same model parameterisations
-%  found in Figure \protect \ref{fig:sensitivity_boundary}. The
-%  reference flow speeds are shown in Figure \protect
-%  \ref{fig:reference_model} (right).}
-%\label{fig:sensitivity_boundary_speed}
-%\end{center}
-%\end{figure}
+\begin{figure}[ht]
+\begin{center}
+\includegraphics[width=\textwidth,keepaspectratio=true]{figures/sensitivity_boundary_wave_speed}
+\caption{The maximal flow speeds for the same model parameterisations
+  found in Figure \protect \ref{fig:sensitivity_boundary}.}
+\label{fig:sensitivity_boundary_speed}
+\end{center}
+\end{figure}
+
 
 \begin{figure}[ht]
@@ -95 +86 @@
   buildings will increase the inundation extent beyond what was
   surveyed.}
-  
-  % FIXME (Ole): Include speed picture elsewhere
-  %The right hand image shows the corresponding flow speeds in the absence of buildings.  
-  %The reference results are as shown in Figure
-  %\protect \ref{fig:reference_model}.}
-\label{fig:sensitivity_nobuildings}
+\label{fig:sensitivity_buildings}
 \end{center}
 \end{figure}
 
+
+\begin{figure}[ht]
+\begin{center}
+\includegraphics[width=\textwidth,keepaspectratio=true]{figures/sensitivity_buildings_speed}
+\caption{The maximal flow speeds for the same model parameterisations
+  found in Figure~\protect~\ref{fig:sensitivity_buildings}.
+  As expected the presence of buildings reduce the flow speeds behind them, 
+  but tends to increase speeds in passages between buildings.}
+\label{fig:sensitivity_buildings_speed}
+\end{center}
+\end{figure}