
% This is based on an automatically generated file (by make_report.py).
%
% Manual parts are:
% * an abstract must be written in abstract.tex
% * an introduction must be written in introduction.tex; a basic outline and
%   some of the core inputs are already in place
% * outline of the modelling methodology provided in modelling_methodology.tex
% * the tsunami-genic event should be discussed in tsunami_scenario.tex
% * an computational_setup.tex file needs to be written for the particular scenario
% * the interpretation of the results needs to be written to interpretation.tex
% * maximum inundation maps need to be included in HAT_map.tex and LAT_map.tex etc.
% * damage modelling maps need to be included in HAT_damage and LAT_damage etc.
% * a summary must be written into summary.tex
% * metadata for the scenario data to be included in metadata.tex

\documentclass{article}

\usepackage{ae} % or {zefonts}
\usepackage[T1]{fontenc}
\usepackage[ansinew]{inputenc}
\usepackage{amsmath}
\usepackage{amssymb}
\usepackage{graphicx}
\usepackage{color}
\usepackage[colorlinks]{hyperref}
\usepackage{lscape} %landcape pages support
\usepackage{setspace}
\setstretch{1.25}
\topmargin 0pt
\oddsidemargin 0pt
\evensidemargin 0pt
\marginparwidth 0.5pt
\textwidth \paperwidth
\advance\textwidth -2in


\date{\today}
%\author{Geoscience Australia}

\begin{document}
\title{
\begin{figure}[hbt]
  \centerline{ \includegraphics[scale=0.4]{../report_figures/GAlogo.jpg}}
\end{figure}
Tsunami impact modelling for the North West shelf: Onslow} 
  \maketitle

  \tableofcontents

    \section{Executive Summary}
    \label{sec:execsum}
  \input{execsum}
  
  \section{Introduction}
    \label{sec:intro}
  \input{introduction}

   \section{Modelling methodology}
    \label{sec:methodology}
    \input{modelling_methodology}
    
  \section{Tsunami scenarios}
    \label{sec:tsunamiscenario}
    \input{tsunami_scenario}

   \section{Inundation model}
    \label{sec:anuga}
    \input{anuga}
    \input{computational_setup}
    
  \section{Data sources}
    \label{sec:data}
    \input{data}
    
  \section{Modelling results}
     \label{sec:results}
         
\begin{table} \label{table:locations} 
\caption{Defined point locations for Tsunami impact modelling for the North West shelf: Onslow study area.}
\begin{center}
\begin{tabular}{|l|l|l|l|}\hline
\bf{Point Name} & \bf{Easting} & \bf{Northing} & \bf{Elevation}\\ \hline
Beadon Point Loading Berth & 302986.51 & 7607334.65 & -8.69 \\ \hline 
Hospital & 304973.04 & 7605500.42 & 7.56 \\ \hline 
Bindi Bindi Community & 305430.37 & 7605586.65 & 1.00 \\ \hline 
Power Station & 305687.62 & 7605062.62 & 5.17 \\ \hline 
Airport Runway & 304471.19 & 7602750.41 & 3.00 \\ \hline 
Beadon Creek Docks & 306622.77 & 7604706.10 & 1.76 \\ \hline 
West of Groyne & 306556.76 & 7605791.87 & -2.10 \\ \hline 
Beadon Creek mouth & 306626.50 & 7605532.27 & -2.80 \\ \hline 
Beadon Creek south of dock & 306676.87 & 7604408.63 & -1.49 \\ \hline 
Centre dam wall & 308516.86 & 7603955.82 & 3.00 \\ \hline 
Dam overflow & 307913.42 & 7604034.90 & 1.53 \\ \hline 
Light Tower & 304562.88 & 7606431.74 & 1.47 \\ \hline 
Beadon Bay west & 305311.01 & 7606557.16 & -4.61 \\ \hline 
Beadon Bay east & 307989.36 & 7606591.95 & -3.56 \\ \hline 
\end{tabular} 
  \end{center} 
 \end{table} 
 
\begin{figure}[hbt] 
 \centerline{ \includegraphics[width=150mm, height=100mm]{../report_figures/onslow_gauge_map.jpg}}
\caption{Point locations used for Onslow study.}  
\label{fig:points}
\end{figure}
\input{interpretation} 
\input{MSL_map} 
 \clearpage 
 

   \section{Impact modelling}
    \label{sec:impact}
     \input{damage}

   \section{Issues}
     \input{discussion}
\label{sec:issues}

     \section{Summary}
     \input{summary}
     
    \input{references}
    
   \section{Metadata}
     \label{sec:metadata}
     \input{metadata}

   \section{Time series}
     \label{sec:timeseries}
     
   \section{Damage modelling inputs}
     \label{sec:damageinputs}
     \input{damage_inputs}
\input{latexoutput20060515001733} 
 \clearpage 
 
\end{document}