
% This is based on an automatically generated file (by make_report.py).
%
% Manual parts are:
% * an abstract must be written in abstract.tex
% * an introduction must be written in introduction.tex; a basic outline and
%   some of the core inputs are already in place
% * outline of the modelling methodology provided in modelling_methodology.tex
% * the tsunami-genic event should be discussed in tsunami_scenario.tex
% * an computational_setup.tex file needs to be written for the particular scenario
% * the interpretation of the results needs to be written to interpretation.tex
% * maximum inundation maps need to be included in HAT_map.tex and LAT_map.tex etc.
% * damage modelling maps need to be included in HAT_damage and LAT_damage etc.
% * a summary must be written into summary.tex
% * metadata for the scenario data to be included in metadata.tex

\documentclass{article}

\usepackage{ae} % or {zefonts}
\usepackage[T1]{fontenc}
\usepackage[ansinew]{inputenc}
\usepackage{amsmath}
\usepackage{amssymb}
\usepackage{graphicx}
\usepackage{color}
\usepackage[colorlinks]{hyperref}
\usepackage{lscape} %landcape pages support
\usepackage{setspace}
\usepackage{rotating}
\include{appendix}
\setstretch{1.25}
\topmargin 0pt
\oddsidemargin 0pt
\evensidemargin 0pt
\marginparwidth 0.5pt
\textwidth \paperwidth
\advance\textwidth -2in


\date{\today}
%\author{Geoscience Australia}

\begin{document}
\title{Comparison between ANUGA and MOST - Hobart}
\maketitle
\begin{figure}[hbt] 
 \centerline{ \includegraphics[scale=0.6]{../report_figures/gauges_map_bom.jpg}}
\caption{Point locations used for boundary investigation.}  
\label{fig:points}
\end{figure}
\begin{figure}[hbt] 
 \centerline{ \includegraphics[width=\paperwidth]{compare_elev.png}}
\caption{Elevation data for ANUGA and MOST.}  
\label{fig:elevation}
\end{figure}
\input{latexoutput_boundary} 
 \clearpage 
 

\end{document}
