problem with C code in fit interpolate

[nick]

Can you provide any information about this error, it is the third time it has occurred with this code

-----------------------
*** glibc detected *** double free or corruption (!prev): 0x000000000162fc10 ***


One of the processes started by mpirun has exited with a nonzero exit
code.  This typically indicates that the process finished in error.
If your process did not finish in error, be sure to include a "return
0" or "exit(0)" in your C code before exiting the application.

PID 8578 failed on node n10 (192.168.0.241) due to signal 6.
-----------------------------------------------------------------------------

It occurs when running an exmouth model in parallel, (the sequential run works

this is the directory of the parallel run J:\inundation\data\western_australia\exmouth_tsunami_scenario\anuga\outputs\20070525_034301_run_basic_1.4_nbartzis

this is the directory of the last serial run J:\inundation\data\western_australia\exmouth_tsunami_scenario\anuga\outputs\20070525_033245_run_basic_1.4_nbartzis

+-------------------------------------------------------------
| Fri May 25 15:02:22 2007. Evaluating function _file_function
+-------------------------------------------------------------
| Argument:     '/d/xrd/gem/5/nhi/inundation/data/western_australia/exmouth_tsunami_scenario/anuga/boundaries/urs/dampier/1_10000/exmouth_3854_17042007.sww'
| Keyword Args: {'quantities': ['stage', 'xmomentum', 'ymomentum'], 'interpolation_points': Array: (187, 2), 'time_thinning': 12, 'domain_starttime': 0, 'verbose': True}
| Reason:       No cached result
+-------------------------------------------------------------

Reading /d/xrd/gem/5/nhi/inundation/data/western_australia/exmouth_tsunami_scenario/anuga/boundaries/urs/dampier/1_10000/exmouth_3854_17042007.sww
File_function data obtained from: /d/xrd/gem/5/nhi/inundation/data/western_australia/exmouth_tsunami_scenario/anuga/boundaries/urs/dampier/1_10000/exmouth_3854_17042007.sww
  References:
    Lower left corner: [189945.759564, 7488724.335279]
    Start time:   4000.000000
Building interpolation matrix from source mesh (648 vertices, 1086 triangles)
FitInterpolate: Building mesh
FitInterpolate: Building quad tree
Interpolating (187 interpolation points, 1034 timesteps). Timesteps were thinned by a factor of 12
 time step 0 of 1034
 time step 104 of 1034
 time step 208 of 1034
 time step 312 of 1034

here is an example of the same problem with code that runs quicker

\inundation\data\western_australia\exmouth_tsunami_scenario\anuga\outputs\20070530_062210_run_store_0_nbartzis

you should be able to execute "run_exmouth.py" from this directory and it will create another directory with the output results

It would be very useful if the error could be verified. This would be done by someone else running this code using mpirun in parallel eg "mpirun c0-3 python run_exmouth.py"