Timeline


and

May 18, 2007:

4:07 PM Changeset [4460] by ole
Faster code for get_disconnected_triangles
3:41 PM Ticket #154 (quantity.get_vertex_values is slow) created by anonymous
Profiling of okushiri (yieldstep=0.05, finaltime=2) gave the following …

May 17, 2007:

11:34 AM Ticket #153 (get_revision_number doesn't get revision # if executed with IDLE or emacs) created by ole
Running script through IDLE resulted in sww file with revision_number …

May 16, 2007:

4:42 PM Changeset [4459] by duncan
clean up
4:37 PM Changeset [4458] by duncan
removing code to handle lone verts. Triangle does it now.
4:36 PM Changeset [4457] by nick
working version of alpha validation
4:06 PM Ticket #148 (problem with loading .pts file in Sri lanka) closed by duncan
invalid: I've changed the assert to a warning. Note anuga does not check the …
4:03 PM Ticket #147 (Store min and max values of all quantities in sww file) closed by duncan
fixed
3:31 PM Changeset [4456] by duncan
stop the warnings when testing
3:13 PM Changeset [4455] by duncan
Adding changes to sww file format. This revision has been tested as stable.
3:00 PM Changeset [4454] by duncan
Maybe unstable
2:58 PM Changeset [4453] by duncan
unstable.
2:53 PM Changeset [4452] by duncan
This revision is unstable. Don't check in to this revision.
12:09 PM Changeset [4451] by duncan
changing asserts to warnings
12:06 PM Changeset [4450] by duncan
comments
11:53 AM Changeset [4449] by duncan
Getting triangle to automatically remove lone vertices
11:46 AM Changeset [4448] by duncan
only one compile.py cont..
11:32 AM Changeset [4447] by duncan
now there is only one compile.py file.
11:26 AM Changeset [4446] by duncan
Modified to be general, so mesh engine doesn't need its own compile.py file
11:23 AM Changeset [4445] by duncan
changed to run faster
11:20 AM Changeset [4444] by duncan
saman's flume
11:19 AM Changeset [4443] by duncan
friction UA: Taking into account different gauges for rough and smooth …

May 15, 2007:

4:46 PM Changeset [4442] by ole
Comment on runs with two types of limiters
4:45 PM Changeset [4441] by ole
Work with Rudy and Ted 9 May 20007
4:42 PM Changeset [4440] by ole
Examples prepared for Rudy
4:37 PM Changeset [4439] by ole
Work area for collaboration with Rudy van Drie and Ted Rigby 9 May 2007
4:34 PM Changeset [4438] by ole
Inflow forcing function - inspired by Rudy van Drie
4:31 PM Changeset [4437] by ole
Enabled test using new tight slope limiters. It failed before.
4:29 PM Changeset [4436] by nick
clean up and update source function 'eqf however there are still …
4:27 PM Changeset [4435] by ole
Changed compiler name to gcc.exe for Win32 platforms following …
4:19 PM Changeset [4434] by nick
update pt hedland and urs
4:18 PM Changeset [4433] by nick
add get boundary points
4:17 PM Ticket #146 (unable to browse source via trac) closed by anonymous
fixed: Fixed by Matt Oliver by reinstalling Subversion using flat files and …
4:17 PM Changeset [4432] by nick
update onslow and add urs
4:16 PM Changeset [4431] by nick
add broome urs
4:15 PM Changeset [4430] by nick
update dampier
4:13 PM Changeset [4429] by nick
update broome
4:13 PM Changeset [4428] by duncan
test
4:12 PM Changeset [4427] by nick
updated alpha stuff
4:01 PM Changeset [4426] by ole
Changed compiler name to gcc.exe for Win32 platforms following …

May 14, 2007:

2:48 PM Ticket #152 (Add version info to sww files.) created by ole
Add the ANUGA version number info to sww files. The function, …

May 8, 2007:

5:14 PM Ticket #151 (incorporate the get_timeseries.py script into anuga source) created by nick
This is similar to ticket 150, I believe this can plot multiple …
4:57 PM Ticket #150 (incorporate the Export_data.py script into anuga source) created by nick
I feel that importing export_data.py into the anuga source would …

May 7, 2007:

9:07 AM Ticket #149 (Consistent API for file boundaries) created by ole
File_boundary and Field_boundary currently takes the filename of an …

May 4, 2007:

2:20 PM Ticket #146 (unable to browse source via trac) reopened by steve
Well, its down again. At least the apache server is working again …

May 3, 2007:

6:23 PM Changeset [4425] by ole
Added points datafile as a caching dependency. Also implemented that …
5:25 PM Ticket #146 (unable to browse source via trac) closed by steve
fixed: We had to delete the old repository and create it a new. THe version …
4:54 PM Ticket #148 (problem with loading .pts file in Sri lanka) created by nick
run on cyclone on one cpu G2 = Geospatial_data(file_name = …
3:25 PM Ticket #146 (unable to browse source via trac) reopened by ole
The problem reappeared today. Steve rebooted datamining which …

May 2, 2007:

11:29 AM Ticket #146 (unable to browse source via trac) closed by steve
fixed: Somehow the ga repository had some locked files. Odds are there was …

May 1, 2007:

1:45 PM Ticket #143 (setting initial conditions using Polygon_function) closed by Duncan <duncan@…>
invalid: The polygon points are absolute values. domain.set_quantity uses …
10:58 AM Ticket #147 (Store min and max values of all quantities in sww file) created by ole
A viewer that colour-codes surfaces based on values of quantities will …
5:11 AM Ticket #146 (unable to browse source via trac) created by darran
[…]

Apr 30, 2007:

6:54 PM Ticket #145 (Forcing function implementing Culverts) created by ole
A forcing function that can add and remove water at arbitrary …
6:51 PM Ticket #144 (Investigate small timesteps induced by 'new' slope limiters) created by ole
Make new slope limiters default. A few unprepared tests remaini and …

Apr 29, 2007:

3:16 PM Ticket #143 (setting initial conditions using Polygon_function) created by jane.sexton@…
When setting high tide initial conditions, we want to ensure that …
3:14 PM Changeset [4424] by sexton
incorporating new test for Polygon_function - used in ICs

Apr 27, 2007:

1:29 PM Changeset [4423] by sexton
updates for export scripts

Apr 24, 2007:

12:03 PM Changeset [4422] by nick
good version of dampier and update the export_results.py
10:34 AM Changeset [4421] by duncan
removing files no longer needed
10:32 AM Changeset [4420] by duncan
check in current scenario
10:31 AM Changeset [4419] by duncan
modify run_compile_test_all.py to run a verbose test all as well
10:16 AM Changeset [4418] by ole
Ran Duncan's verbose tests, verified problem with mint and maxt, and …
10:00 AM Changeset [4417] by nick
clean up and comment validation

Apr 23, 2007:

4:39 PM Changeset [4416] by duncan
small bug fix
4:33 PM Ticket #142 (small change in Data_manager that needs to be checked) closed by Duncan <duncan@…>
fixed: I changed the code so it's ok. This occurred since code in verbose …
4:24 PM Changeset [4415] by duncan
tidy up and set tests up for testing verbose code
4:02 PM Changeset [4414] by duncan
checking in a set up of testing verbose sections of the code. May not …
3:58 PM Changeset [4413] by duncan
bug fix
11:58 AM Changeset [4412] by nick
small change to screen_catcher
11:57 AM Changeset [4411] by nick
automated validation boundary file test …
11:54 AM Changeset [4410] by nick
fix and update boundary file test
10:03 AM Changeset [4409] by nick
update to automated tests
10:02 AM Changeset [4408] by nick
update to automated tests
9:08 AM Ticket #142 (small change in Data_manager that needs to be checked) created by nick
Hi Dunc This is tiny... But for some reason I was getting this error …
9:03 AM Changeset [4407] by nick
changed print statment in urs2sww function to not use starttime

Apr 20, 2007:

3:47 PM Ticket #141 (Problem with parallel code in Field_boundary (Interpolation_function)) closed by nick
fixed: It seems that this problem was caused by mpirun having issues. because …
3:32 PM Ticket #140 (I can't remember how to compile metis ) closed by Duncan <duncan@…>
fixed
3:28 PM Ticket #141 (Problem with parallel code in Field_boundary (Interpolation_function)) created by nick
I have run similar code in parallel on both Tornado and cyclone and …
3:18 PM Changeset [4406] by duncan
added some help when metis does not import
11:40 AM Changeset [4405] by duncan
scenario check in

Apr 19, 2007:

2:03 PM Changeset [4404] by ole
typo

Apr 18, 2007:

4:29 PM Ticket #140 (I can't remember how to compile metis ) created by Duncan <duncan@…>
if the .so for metis isn't in X:\anuga_core\source\pymetis parallel …
2:57 PM Changeset [4403] by nick
added Boundary_file test, this compares 2 time series from one …
2:45 PM Changeset [4402] by nick
update to exmouth
2:44 PM Changeset [4401] by nick
update to dampier
2:40 PM Changeset [4400] by duncan
name fix
1:19 PM Changeset [4399] by nick
updates to exmouth
12:33 PM Ticket #139 (Model seems to die with dampier runs on cyclone, using 8 processors) created by nick
I have this model …
11:58 AM Changeset [4398] by nick
commented out "write_time" and since parallel_shallow_water.py …
11:54 AM Changeset [4397] by nick
added test_track_speeds again by svn merge -r4392:4393
11:48 AM Changeset [4396] by nick
reverted to revision 4391 because tests were broken.
10:52 AM Changeset [4395] by nick
commented out "write_time" and since parallel_shallow_water.py …
10:43 AM Changeset [4394] by nick
add print statement to interpolate function
10:42 AM Changeset [4393] by nick
add test_track_speeds
10:41 AM Changeset [4392] by nick
added print statements
10:10 AM Changeset [4391] by duncan
nit noy (small change)
10:09 AM Changeset [4390] by duncan
adding a test
8:42 AM Changeset [4389] by duncan
backwards compatibility
Note: See TracTimeline for information about the timeline view.