Changeset 2974 for production

Timestamp:

May 25, 2006, 5:04:57 PM (18 years ago)

Author:

sexton

Message:

updates

Location:

production/onslow_2006/report

Files:

• HAT_damage.tex (added)
• HAT_map.tex (added)
• LAT_damage.tex (added)
• LAT_map.tex (added)
• MSL_damage.tex (added)
• MSL_map.tex (added)
• damage.tex (modified) (2 diffs)
• results.tex (modified) (4 diffs)
• tsunami_scenario.tex (modified) (1 diff)

production/onslow_2006/report/damage.tex

@@ -22 +22 @@
 There is one indigeneous community located in this study area as seen
 in \ref{fig:communities}. The population of the Bindibindi community is 140 and is 
-situated in a potentially vulnerable location (close to the river opening).
+situated in a potentially vulnerable location.
 
 \begin{figure}[hbt]
@@ -31 +31 @@
   \label{fig:communities}
 \end{figure}
-
-
-
-\subsection{Highest Astronomical Tide}
-\subsection{Lowest Astronomical Tide}

production/onslow_2006/report/results.tex

@@ -6 +6 @@
 scenario and where further mesh refinement has been made. The choice
 of the refinement is based around the important inter-tidal zones and
-other important features such as islands and rivers.
+other important features such as islands and rivers. The most northern
+boundary of the study area is placed approximately around the 100m contour
+line. 
 The resultant computational mesh is then seen in \ref{fig:mesh_onslow}.
 
 \begin{figure}[hbt]
 
-  \centerline{ \includegraphics[width=75mm, height=75mm]{../report_figures/onslow_data_poly.png}}
+  \centerline{ \includegraphics[width=100mm, height=75mm]{../report_figures/onslow_data_poly.png}}
 
   \caption{Study area for Onslow scenario highlighting areas of increased refinement.}
@@ -20 +22 @@
 \begin{figure}[hbt]
 
-  %\centerline{ \includegraphics[width=75mm, height=75mm]{.png}}
+  %\centerline{ \includegraphics[width=100mm, height=75mm]{../report_figures/.png}}
 
   \caption{Computational mesh for Onslow study area}
@@ -29 +31 @@
 region surrounding the Onslow town centre. The resolution is increased 
 to 2500 m$^2$ for the region surrounding the coast and further increased
-to 20000 m$^2$ for the remainder of the study area. With these
-resolutions in place, the study area consists of 440150 triangles. The 
-associated accuracy 
-for these resolutions is approximatly 22m, 50m and to 140m. This means
+to 20000 m$^2$ for the region reaching approximately the 50m contour line.
+The remainder of the study area has a resolution of 100000 m$^2$. 
+With these resolutions in place, the study area consists of 440150 triangles. 
+The associated accuracy 
+for these resolutions is approximatly 22m, 50m, 140m and 315m for the increasing
+resolutions. This means
 that we can only be confident in the calculated inundation to approximately
-22m accuracy. This is because ANUGA calculates whether each cell in the 
-triangular
+22m accuracy within the Onslow town centre. 
+This is because ANUGA calculates whether each cell in the triangular
 mesh is wet or dry. It is important
 to refine the mesh to be commensurate with the underlying data especially in 
@@ -44 +48 @@
 for high, low and zero tide conditions. These locations have
 been chosen to assist in describing the features of the tsunami wave
-and the resultant impact ashore.
+and the resultant impact ashore. It is evident from \ref{fig:ic_high}
+that the DEM ...
+
+\begin{figure}[hbt]
+
+  %\centerline{ \includegraphics[width=100mm, height=75mm]{../report_figures/.png}}
+
+  \caption{Initial condition for mean sea level.}
+  \label{fig:ic_zero}
+\end{figure}
+
+\begin{figure}[hbt]
+
+  %\centerline{ \includegraphics[width=100mm, height=75mm]{../report_figures/.png}}
+
+  \caption{Initial condition for lowest astronomical tide.}
+  \label{fig:ic_low}
+\end{figure}
+
+\begin{figure}[hbt]
+
+  %\centerline{ \includegraphics[width=100mm, height=75mm]{../report_figures/.png}}
+
+  \caption{Initial condition for highest astronomical tide.}
+  \label{fig:ic_high}
+\end{figure}
+
 
 What are the features of the tsunami wave?

production/onslow_2006/report/tsunami_scenario.tex

@@ -31 +31 @@
 \begin{figure}[hbt]
 
-  \centerline{ \includegraphics[width=75mm, height=75mm]{../report_figures/mw9.jpg}}
+  \centerline{ \includegraphics[width=100mm, height=75mm]{../report_figures/mw9.jpg}}
 
   \caption{Maximum wave height (in cms) for a Mw 9 event off the