Changeset 3267

Timestamp:

Jul 3, 2006, 11:08:30 AM (18 years ago)

Author:

sexton

Message:

small updates for Onslow report

Location:

production/onslow_2006

Files:

• make_report.py (modified) (3 diffs)
• report/data.tex (modified) (1 diff)
• report/discussion.tex (modified) (3 diffs)
• report/interpretation.tex (modified) (1 diff)

production/onslow_2006/make_report.py

@@ -148 +148 @@
 \usepackage{lscape} %landcape pages support
 \usepackage{setspace}
+\include{appendix}
 \setstretch{1.25}
 \\topmargin 0pt
@@ -280 +281 @@
      
     \input{references}
+
+    \appendix
     
    \section{Metadata}
@@ -299 +302 @@
 
         \section{Time series}
-     \label{sec:timeseriesdted}
+     \label{sec:timeseriescompare}
 
 """

production/onslow_2006/report/data.tex

@@ -37 +37 @@
 The Australian Hydrographic Office (AHO) has supplied extensive
 fairsheet data which has also been utilised. 
-The coastline has been generated from the DIGO DTED Level 2 and modified
+The coastline has been generated by
 using the aerial photography and two detailed surveys provided
-by WA Department of Planning and Infrastructure. {\bf confirm}
-Section \ref{sec:metadata} provides more details and metadata for data 
+by WA Department of Planning and Infrastructure as the WA DLI data
+along the coast is error prone. {\bf confirm}
+Appendix \ref{sec:metadata} provides more details and metadata for data 
 used for this study.
 Table \ref{table:data} summarises the available data for this study.

production/onslow_2006/report/discussion.tex

@@ -40 +40 @@
 
   \caption{Onslow region showing the -1.5m AHD (LAT), 0m AHD (MSL)
- and -1.5m AHD (LAT) contour lines.}
+ and -1.5m AHD (LAT) contour lines using the DTED Level 2 data.}
   \label{fig:contours_dted}
 \end{figure}
@@ -50 +50 @@
 
   \caption{Onslow region showing the -1.5m AHD (LAT), 0m AHD (MSL) 
-and -1.5m AHD (LAT) contour lines.}
+and -1.5m AHD (LAT) contour lines using the WA DLI data.}
   \label{fig:contours_dli}
 \end{figure}
@@ -58 +58 @@
 to demonstrate the importance of using the best possible data set. As
 before, we show the time history of the water's stage and velocity for the
-point locations in Table \ref{table:locations} for the DTED data. 
-These results are shown in Section \ref{sec:timeseriesdted}.
+point locations in Table \ref{table:locations} for both the DTED and 
+DLI data at MSL. 
+These results are shown in Section \ref{sec:timeseriescompare}.
 

production/onslow_2006/report/interpretation.tex

@@ -8 +8 @@
 Figure \ref{fig:points}. The water's stage and speed are shown
 as a function of time in the series of graphs shown in
-Section \ref{sec:timeseries}. Stage is defined as the absolute
+Appendix \ref{sec:timeseries}. Stage is defined as the absolute
 water level relative to AHD. Both stage and speed are shown
 on consistent scales to allow comparison between point locations.