Timeline
Oct 30, 2006:
- 6:40 PM Changeset [3895] by
- Work on okushiri (smaller mesh)
- 6:33 PM Changeset [3894] by
- Added comment about where to get netcdf.dll
- 5:20 PM Changeset [3893] by
- Allowed set_name to accept extension '.sww'
- 5:12 PM Changeset [3892] by
- Script to create distributions
- 5:04 PM Changeset [3891] by
- Renaming
- 4:31 PM Ticket #107 (add tests to urs2sww to check minlat and minlon are correct) created by
- check minlat is smaller than maxlat and the same with minlon and …
- 3:42 PM Changeset [3890] by
- Added distribution for anuga_viewer
- 3:36 PM Changeset [3889] by
- Removed automatically generated file Benchmark_2_Bathymetry.pts
- 3:31 PM Changeset [3888] by
- Added quick-install info to installation guide
- 3:28 PM Changeset [3887] by
- Name change to anuga_viewer
- 2:01 PM Changeset [3886] by
- hobart update for export output
- 1:56 PM Changeset [3885] by
- update to dampier
- 11:44 AM Changeset [3884] by
- Allowed parallel abstraction to work sequentially without Metis
- 11:41 AM Changeset [3883] by
- More cleanup of okushiri prior to release
- 11:14 AM Changeset [3882] by
- Added the parallel capability to run_okushiri.py
- 9:21 AM Changeset [3881] by
- broome updates
Oct 29, 2006:
- 1:06 PM Changeset [3880] by
- Updated README file
Oct 27, 2006:
- 5:49 PM Changeset [3879] by
- Brought back original bathymetry file for Okushiri. It is best to show …
- 5:34 PM Changeset [3878] by
- Okushiri mesh using new mesh interface
- 2:29 PM Changeset [3877] by
- build_dampier works... run might needs some changes
- 12:33 PM Ticket #106 (Realtime Visualiser hangs on pause) created by
- Report from Steve: I tried the visualise_rectangle, but for me it …
Oct 26, 2006:
- 5:31 PM Changeset [3876] by
- Added parameter alpha_balance to config.py to deal with large jumps in bed
- 1:29 PM Changeset [3875] by
- Moved the SConstruct and build_options.py into the source/anuga …
- 1:06 PM Changeset [3874] by
- Made the overlayed yellow polygon visible in the realtime example.
- 1:02 PM Changeset [3873] by
- Fixed the visualiser to actually run properly in its own thread. …
- 11:56 AM Changeset [3872] by
- added a commented out segment of code that could be used to test for …
- 10:38 AM Changeset [3871] by
- dampier updates
- 7:56 AM Changeset [3870] by
- dampier updates
Oct 25, 2006:
- 6:51 PM Changeset [3869] by
- data update for sydney demo
- 6:24 PM Changeset [3868] by
- added tests and comments
- 6:01 PM Changeset [3867] by
- more fixups
- 5:59 PM Ticket #105 (new unit test for create_mesh_from_regions) created by
- Just noticed if a bounding polygon doesn't have a bounding tag it will …
- 5:51 PM Changeset [3866] by
- fig fixups
- 5:47 PM Changeset [3865] by
- Ooops - one of them should be machine precision. Sorry.
- 5:41 PM Changeset [3864] by
- revisions
- 5:38 PM Changeset [3863] by
- Small updates here and there
- 5:36 PM Changeset [3862] by
- results for new gauges
- 5:32 PM Changeset [3861] by
- Played with measures of similarity between timeseries
- 5:25 PM Changeset [3860] by
- latex stuff
- 5:24 PM Changeset [3859] by
- fiddling
- 5:21 PM Changeset [3858] by
- Brought back single precision check in search functions. Machine …
- 5:06 PM Changeset [3857] by
- and another two
- 5:01 PM Changeset [3856] by
- forgot 2 figs
- 4:59 PM Changeset [3855] by
- minor updates
- 4:54 PM Changeset [3854] by
- Added new mesh interface into original okushiri island validation and …
- 4:31 PM Changeset [3853] by
- update to dampier (this works)
- 3:49 PM Changeset [3852] by
- updated results based on refined mesh
- 3:19 PM Changeset [3851] by
- build_dampier.py is working run_dampier.py should work... it is still …
Oct 24, 2006:
- 4:56 PM Changeset [3850] by
- Introduced a covariance measure to verify Okushiri timeseries plus …
- 4:19 PM Ticket #104 (more tests needed for urs2sww or urs2nc) created by
- suggestions 1) create a simple elevation as a MUX file and then …
- 4:14 PM Changeset [3849] by
- Added function and test for calculating machine precision for Python Floats
- 1:47 PM Changeset [3848] by
- Ooops
- 1:44 PM Changeset [3847] by
- Shorthand for setting all beta values for the limiters and some cleanup
- 12:59 PM Changeset [3846] by
- Refactored references to domain.filename away. Use …
- 12:54 PM Changeset [3845] by
- Work on Okushiri
- 12:00 PM Changeset [3844] by
- Formatting
- 11:41 AM Ticket #103 (Get Sydney example to work as a user guide example) created by
- Set up run_sydney.py in user_guide/example such that The script is …
- 10:11 AM Changeset [3843] by
- Added note about origins and licensing of triangle.c
Oct 23, 2006:
- 9:02 PM Changeset [3842] by
- 3:27 PM Changeset [3841] by
- small update dampier
- 3:02 PM Changeset [3840] by
- update to dampier
- 2:12 PM Changeset [3839] by
- small update to dampier
- 2:06 PM Changeset [3838] by
- updates to dampier
- 2:02 PM Changeset [3837] by
- small changes to dampier
- 1:47 PM Changeset [3836] by
- update dampier_2006/project.py
- 1:44 PM Changeset [3835] by
- update to dampier
- 11:24 AM Changeset [3834] by
- Cosmetics
Oct 20, 2006:
- 4:14 PM Changeset [3833] by
- More timings
- 3:45 PM Changeset [3832] by
- More parallel timings
- 3:14 PM WikiStart edited by
- (diff)
- 3:13 PM WikiStart edited by
- (diff)
- 3:11 PM WikiStart edited by
- (diff)
- 3:10 PM WikiStart edited by
- (diff)
- 2:05 PM WikiStart edited by
- (diff)
- 2:02 PM Changeset [3831] by
- Renamed links to style guides (from spaces to underscores)
Oct 19, 2006:
- 6:35 PM Changeset [3830] by
- Fixed broken tests
- 6:21 PM Changeset [3829] by
- Retired modify_boundary (now rolled into set_boundary). Got …
- 5:40 PM Changeset [3828] by
- updates to dampier
- 5:36 PM Changeset [3827] by
- more dampier
- 5:34 PM Changeset [3826] by
- updates to data_manager.py urs2sww
- 1:39 PM Ticket #102 (Get true boundaries of parallel domains) created by
- Parallel domains are equipped with 'ghost' triangles. It would be …
Oct 18, 2006:
- 5:51 PM Changeset [3825] by
- Work on validation
- 5:39 PM Ticket #93 (Axes with units and scales + overlaid polygons in visualisations) closed by
- fixed: Now added. A list of points can be used to bound a polygon. See the …
- 1:52 PM Changeset [3824] by
- added comments
- 1:48 PM Changeset [3823] by
- Simple commandline interface to vtk viewer
- 12:29 PM Ticket #101 (urs2mux needs more tests) created by
- test that more quantities are correct
- 12:28 PM Changeset [3822] by
- Added comment about scons
- 12:18 PM Changeset [3821] by
- More detail about mux files
- 11:04 AM Changeset [3820] by
- bug fix. takes into account mux has lat varying fastest, nc has long …
Oct 17, 2006:
- 6:31 PM Changeset [3819] by
- Updated default maximum_allowed_speed according to findings from the …
- 6:07 PM Changeset [3818] by
- Work on parallel test and attempt to get TRUE bounding polygon for …
- 4:45 PM Changeset [3817] by
- Cosmetics
- 4:44 PM Changeset [3816] by
- installing from zip files
- 4:41 PM Changeset [3815] by
- adding anuga install as a zipped file. put this into site packages …
- 4:33 PM Changeset [3814] by
- Grad proposals 2007
- 3:04 PM Changeset [3813] by
- Added support for overlaying polygons in the vtk visualisers. See the …
- 2:54 PM Changeset [3812] by
- Update to graduate proposals
- 2:23 PM Changeset [3811] by
- Okushiri validation with a tiny run-off. This one is OK.
- 1:01 PM Changeset [3810] by
- Fixed the .exp bug with SCons
- 12:21 PM Changeset [3809] by
- introduce refined grids around specified sites for Hobart
- 12:05 PM Changeset [3808] by
- testing urs2sww
- 11:54 AM Ticket #99 (test_inundation_damage2 fails intermitently) closed by
- fixed
- 11:54 AM Changeset [3807] by
- fixing test, ticket #99
- 10:30 AM Changeset [3806] by
- hack so test_shallow_water_domain.py passes. Connected to ticket 100.
- 10:18 AM Ticket #100 (test_shallow water_domain failing) created by
- I get this error when installing ANUGA, not precompiled on …
- 10:00 AM Ticket #99 (test_inundation_damage2 fails intermitently) created by
- this is what happens when it fails; […]
- 9:25 AM Changeset [3805] by
- boundary fig/report update
- 8:33 AM Ticket #98 (A test that failed the first time test_all is run, after an anuga ...) created by
- Some tests only seem to fail once, after an install. Here's an …
Oct 16, 2006:
- 10:06 PM Changeset [3804] by
- Changed the calculation of last timestep
- 8:32 PM Changeset [3803] by
- strange error in test_shallow_water_domain on bogong
- 6:07 PM Changeset [3802] by
- Made sure Dampier 2006 runs
- 5:56 PM Changeset [3801] by
- Searching for optimal max speed for okushiri validation
- 5:53 PM Changeset [3800] by
- Moving from karratha to dampier
- 5:47 PM Changeset [3799] by
- Work on okushiri mesh generation to use new mesh_interface
- 5:25 PM Changeset [3798] by
- Name change as suggested by Nick
- 5:07 PM Changeset [3797] by
- Cosmetics according to style guide
- 4:28 PM Changeset [3796] by
- requirements for installing anuga
- 3:59 PM Changeset [3795] by
- incorporating new interior region for hobart
- 2:40 PM Changeset [3794] by
- Work on okushiri automatic validation
- 2:36 PM Changeset [3793] by
- One more file untabified
- 2:35 PM Changeset [3792] by
- info about python2X.dll
- 2:34 PM Changeset [3791] by
- Untabified scripts that had inconsistent mixes of spaces and tabs (as …
- 2:27 PM Changeset [3790] by
- fig update
- 2:25 PM Changeset [3789] by
- Added set_maxmum_allowed_speed to zero to simulate behaviour of ANUGA …
- 2:18 PM Ticket #97 (Diagnostics about which triangle causes the smallest timestep) created by
- It would be useful to get information about which triangle causes the …
- 2:12 PM Changeset [3788] by
- path fixups
- 2:00 PM Changeset [3787] by
- updates to documentation on working with anuga/ArcGIS
- 12:24 PM Changeset [3786] by
- Values now as close to the 2005 version of Okushiri as possible
- 10:47 AM Changeset [3785] by
- 10:45 AM Changeset [3784] by
- Better diagnostics for parallel test
- 10:11 AM Changeset [3783] by
- Comments
Oct 13, 2006:
- 4:29 PM Changeset [3782] by
- Fiddle with okushiri validation
- 3:52 PM Changeset [3781] by
- This test reveals a definitive problem with the correctness of the …
- 3:47 PM Changeset [3780] by
- Test that parallel code produces the same results as sequential
- 3:44 PM Changeset [3779] by
- refining Hobart example even further …
- 3:38 PM Changeset [3778] by
- New test of runup timeseries - are they consistent across computer …
- 3:07 PM Changeset [3777] by
- Removed friction from parallel test for the time being
- 2:43 PM Changeset [3776] by
- Made parallel abstraction work on sequential machine without pypar. …
- 2:16 PM Changeset [3775] by
- Work on simple parallel test
- 1:58 PM Changeset [3774] by
- Work on automatic validation
- 1:41 PM Changeset [3773] by
- Played with parallel example
- 12:51 PM Changeset [3772] by
- Added script to recursively clean computer generated garbage
- 12:39 PM Changeset [3771] by
- update pic
- 12:28 PM Changeset [3770] by
- Missed some in regard to changeset:3739
- 12:24 PM Changeset [3769] by
- Changed references to convert_points_from_latlon_to_utm to the new …
- 12:13 PM Changeset [3768] by
- A bit of formatting
- 8:56 AM Changeset [3767] by
- 8:47 AM Changeset [3766] by
- investigating hobart output
Oct 12, 2006:
- 4:54 PM Changeset [3765] by
- Forgot to add graphics
- 4:23 PM Changeset [3764] by
- Update
- 1:09 PM Ticket #91 (User manual Sydney example crashes) closed by
- worksforme: With INUNDATIONHOME set, it worked fine for me.
- 11:53 AM Changeset [3763] by
- report updates
- 10:04 AM Changeset [3762] by
- Made Sydney example fit into new file structure
Oct 11, 2006:
- 5:54 PM Ticket #96 (exporting points file from clipped datasets) closed by
- fixed
- 5:46 PM Ticket #86 (tests in data_manager are being skipped.) closed by
- fixed: Fixed in changeset:3761
- 5:46 PM Changeset [3761] by
- Removed old tests in data_manager as per ticket:86 - they were old …
- 5:20 PM Changeset [3760] by
- Removed irrelevant files
- 5:15 PM Changeset [3759] by
- Nothing
- 5:14 PM Changeset [3758] by
- Trying other parameters for okushiri
- 5:05 PM Changeset [3757] by
- Work towards automated validation of ANUGA using okushiri
- 5:04 PM Changeset [3756] by
- Updates to channel examples
- 4:47 PM Changeset [3755] by
- Added some screenshots
- 4:45 PM Changeset [3754] by
- Added channel examples to user manual
- 3:58 PM Changeset [3753] by
- Updates
- 2:54 PM Changeset [3752] by
- change to reflect file movement
- 2:27 PM Changeset [3751] by
- urs file info
- 2:22 PM Changeset [3750] by
- more error handling
- 2:22 PM Changeset [3749] by
- Disabled search for scipy (numpy) for the time being.
- 2:10 PM Changeset [3748] by
- minor changes
- 2:09 PM Changeset [3747] by
- Moved channel examples to user manual
- 1:46 PM Changeset [3746] by
- documentation on how to develop a polygon for scenario models
- 12:23 PM Changeset [3745] by
- A few minor changes to convert_from_latlon_to_UTM to make run_karratha work
- 12:22 PM Changeset [3744] by
- Made karratha production use newly resolved convert_from_latlon_to_UTM
- 12:21 PM Changeset [3743] by
- Work on okushiri
- 12:08 PM Changeset [3742] by
- fixing imports
- 11:57 AM Changeset [3741] by
- fix bugs
- 11:53 AM Changeset [3740] by
- Channel examples (developed at SUT, September 2006)
- 10:43 AM Changeset [3739] by
- resolved convert lat longs
- 10:22 AM Changeset [3738] by
- Added attributes into clip functions and tested
Oct 10, 2006:
- 11:40 PM Changeset [3737] by
- In island.py the creap is very thin!
- 5:58 PM Changeset [3736] by
- incorporating test to catch get_attributes from clipped geospatial …
- 4:54 PM Changeset [3735] by
- This fixes ticket:96 plus a few cosmetic things
- 4:11 PM Changeset [3734] by
- Small fix ensuring that mesh file is always stored irrespective of caching.
- 4:10 PM Ticket #96 (exporting points file from clipped datasets) created by
- New functionality to clip data by arbitrary polygon then add up works. …
- 4:06 PM Changeset [3733] by
- incorporate test to add clipped Geospatial data objects - going to add …
- 3:12 PM Changeset [3732] by
- testing clipping datasets for Hobart scenario
- 3:11 PM Changeset [3731] by
- New file
- 3:02 PM Changeset [3730] by
- Added proper error messages to return NULL in c extensions. Fixed up …
- 1:31 PM Changeset [3729] by
- tex updates
- 1:20 PM Changeset [3728] by
- fixups
- 1:12 PM Changeset [3727] by
- latex fixups
- 1:06 PM Changeset [3726] by
- fig
- 1:05 PM Changeset [3725] by
- oops - forgot one
- 1:03 PM Changeset [3724] by
- figures for report
- 12:10 PM Ticket #95 (adding two clipped data sets fails) closed by
- fixed
- 12:10 PM Changeset [3723] by
- Fixed ticket:95
- 11:47 AM Changeset [3722] by
- Work on automated okushiri island validation
- 11:36 AM Changeset [3721] by
- hobart testing and report making
- 11:02 AM Changeset [3720] by
- added urs2sww to convert urs tsunami info to an sww boundary
- 10:48 AM Changeset [3719] by
- Adding holes to create_mesh_from_regions
- 10:31 AM Changeset [3718] by
- Renaming
Oct 9, 2006:
- 5:31 PM Ticket #95 (adding two clipped data sets fails) created by
- New functionality to clip a data set on an arbitrary polygon (either …
- 5:25 PM Changeset [3717] by
- test to add two clipped datasets (to be added to TRAC)
- 4:53 PM Changeset [3716] by
- Ongoing work on run_okushiri and karratha_2006
- 4:50 PM Ticket #94 (sww2dem - math domain error) closed by
- fixed: I believe this was fixed in changeset:3688
- 4:47 PM Ticket #80 (Enable caching and verbose in create_mesh_from_regions) closed by
- fixed: Fixed by changeset:3715
- 4:46 PM Changeset [3715] by
- Enabled caching in create_mesh_from_regions as requested in ticket:80 …
- 3:53 PM Changeset [3714] by
- incorporate clip_outside function to grab data which doesn't fall in a …
- 3:38 PM Changeset [3713] by
- Cleaned up Karratha and moved parallelism away for the time being
- 3:37 PM Changeset [3712] by
- typos
- 3:36 PM Changeset [3711] by
- Update
- 3:26 PM Changeset [3710] by
- Documentation of geospatial_data.clip()
- 2:27 PM Changeset [3709] by
- Update
- 1:58 PM Changeset [3708] by
- Copied (using 'svn cp') okushiri validation files to …
- 1:42 PM Changeset [3707] by
- Renamed the okushiri tank validation from lwru2.py to run_okushiri.py
- 1:36 PM Changeset [3706] by
- Added skeleton for automated validation tests
- 11:08 AM Changeset [3705] by
- Implemented runup height detection in okushiri validation
Oct 5, 2006:
- 8:50 PM Changeset [3704] by
- Changed beta defaults to allow more limiting at wet/dry interface
- 5:50 PM Changeset [3703] by
- 5:32 PM Changeset [3702] by
- Added clipping method to Geospatial data.
- 5:09 PM Changeset [3701] by
- hobart script updates
- 3:42 PM Changeset [3700] by
- Improved runup script for Rosh
- 2:00 PM Changeset [3699] by
- 1:56 PM Changeset [3698] by
- Moved shallow_water_kinetic to shallow_water directory
- 12:21 PM Changeset [3697] by
- Played with limiter example: run_sw_rectangle.py
Oct 4, 2006:
- 5:38 PM Changeset [3696] by
- Added run_sw_rectangle in examples to show improvement in dealing with …
- 5:32 PM Changeset [3695] by
- updates
- 4:04 PM Changeset [3694] by
- In ferret2sww set default of inverted_bathymetry to True
- 2:36 PM Changeset [3693] by
- Incorporated coastline and runup detection for Rosh
- 1:27 PM Changeset [3692] by
- 1:22 PM Changeset [3691] by
- 11:02 AM Changeset [3690] by
- Comment
- 11:00 AM Changeset [3689] by
- Added functionality for getting arbitrary interpolated values in …
- 9:32 AM Changeset [3688] by
- Fixed get_boundary polygon based on information from new unit test. It …
- 9:09 AM Changeset [3687] by
- time series generation for Hobart
- 8:55 AM Changeset [3686] by
- fixing indentation
- 8:51 AM Changeset [3685] by
- removing dead code
Oct 3, 2006:
- 5:47 PM Changeset [3684] by
- Work on get_boundary_polygon using (discontinuous) example that fails
- 5:28 PM Changeset [3683] by
- updates (clipping 25m data into 50m grid, putting MOST boundary on …
- 2:51 PM Changeset [3682] by
- Removed phony targets from the SConstruct (.exp targets)
- 2:31 PM Changeset [3681] by
- Expanded 'import *' into explicit naming
- 1:38 PM Changeset [3680] by
- update to export_results script for Hobart
- 1:38 PM Changeset [3679] by
- updates to Hobart scripts
- 1:32 PM Ticket #94 (sww2dem - math domain error) created by
- During production runs, we have an export_results.py script which …
Oct 1, 2006:
- 6:55 PM Changeset [3678] by
- Added more limiting to cells near dry cells, use beta_*_dry
Note: See TracTimeline
for information about the timeline view.
