Custom Query (329 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:

Results (1 - 100 of 329)

1 2 3 4 →
Ticket Summary Owner Type Priority Milestone Component
#39 testing autogenerated email ole defect normal Appearance and visualisation
#41 tests are 'leaking files' ole defect normal Appearance and visualisation
#46 test_all at ANUGA level fails for me duncan defect normal Testing and validation
#47 Trac internal error ole defect low Management and planning
#48 Separate ghost boundary from physical boundary ole defect lowest Efficiency and optimisation
#49 Address missing logger in cg_solve when tested at the anuga level steve defect low Appearance and visualisation
#50 Write module for timeseries plotting and report generation jane or nick enhancement normal Appearance and visualisation
#51 Integrated damage modelling nick and duncan enhancement normal Functionality and features
#52 Investigate reproducibility of model runs nick defect normal Management and planning
#54 if the sww files are large the tools used to interigate them crash. duncan defect low Functionality and features
#55 Negative stage values have been observed in e.g. the Sydney study. jane defect lowest Functionality and features
#58 Consider migrating ANUGA to use numpy (from scipy) rather than Numeric rwilson defect highest Architecture and API
#59 remove dependency on points dicts from export pts to file Nick defect normal Efficiency and optimisation
#60 Add Crop method to geospatial_data Nick defect lowest Functionality and features
#61 Get boundary of a Geospatial_data object, to allow addition of high res accurate data and low res region data ole defect low Functionality and features
#62 Clean up Load ASCII Duncan defect low Efficiency and optimisation
#63 Match elevation at 'deep' water grids with 'shallow water' meshes someone defect low Functionality and features
#66 Problem with large meshes and cache nick defect normal Functionality and features
#67 possible error in "create_mesh_from_regions ole defect normal Functionality and features
#68 possible error in "create_mesh_from_regions ole defect normal Functionality and features
#69 possible error in "create_mesh_from_regions ole defect normal Functionality and features
#70 Memory useage of Create_mesh_from_regions nick defect low Efficiency and optimisation
#71 Automatically obtain head revision number from subversion ole enhancement low Appearance and visualisation
#72 test_all fails, but the tests, when run in their local directory work. Ole defect low Testing and validation
#76 Allow job recovery after a node crash Ole defect normal Efficiency and optimisation
#77 test_all is segmentation faulting, some of the time duncan defect normal Appearance and visualisation
#84 find out module/class dependencies in ANUGA ole task lowest Architecture and API
#85 Problem with boundary conditions being interpolated incorrectly to some meshes ole defect normal Functionality and features
#88 test ole defect normal Appearance and visualisation
#91 User manual Sydney example crashes Ole defect normal Other
#92 spam spam anonymous defect normal Appearance and visualisation
#94 sww2dem - math domain error ole defect normal Appearance and visualisation
#95 adding two clipped data sets fails ole defect normal Appearance and visualisation
#96 exporting points file from clipped datasets ole defect normal Functionality and features
#98 A test that failed the first time test_all is run, after an anuga install, but not the 2nd time anybody defect low Testing and validation
#99 test_inundation_damage2 fails intermitently Duncan defect low Testing and validation
#100 test_shallow water_domain failing Duncan and Ole defect low Testing and validation
#101 urs2mux needs more tests Duncan defect normal Appearance and visualisation
#103 Get Sydney example to work as a user guide example someone defect normal Documentation
#104 more tests needed for urs2sww or urs2nc ole defect normal Testing and validation
#105 new unit test for create_mesh_from_regions Nick defect normal Testing and validation
#107 add tests to urs2sww to check minlat and minlon are correct duncan defect normal Testing and validation
#108 Interpolation function (and file_function) need to accept geospatial data duncan defect normal Architecture and API
#109 rounding problems with ferret2sww and (urs2sww) duncan defect normal Functionality and features
#111 anuga_user_manual.pdf can not be accessed via trac Ole defect normal Documentation
#112 runcairns ole defect normal Documentation
#114 Join together output sww files from parallel ANUGA code steve defect normal Appearance and visualisation
#115 Problem with file_boundary using a boundary sww file with no origin ole defect high Functionality and features
#116 Change the 'xya' file type in anuga to 'txt' duncan defect normal Functionality and features
#117 test_asc_csiro2sww, test_asc_csiro2sww3, test_asc_csiro2sww4 are failing ole defect normal Testing and validation
#118 overflow error in geospatial data - on cyclone compute nodes nick defect low Functionality and features
#119 unhashable type error on runcairns ole defect normal Testing and validation
#120 Make "set_quantity" read in blocks of file into memory and not the entire file. duncan defect normal Efficiency and optimisation
#121 changeset:4107 broke validation test duncan defect highest Appearance and visualisation
#122 problem unit testing using enthon-python2.4-1.0.0.exe ole defect low Testing and validation
#123 python24.dll not installed with enthought ole defect low Compilation and installation
#124 swallow_water.util.get_version_info doesn't work in Linux ole defect low Functionality and features
#125 Get version info ole defect normal Compilation and installation
#126 Validate_okushiri unit test fails ole defect highest Functionality and features
#127 Some codes in the Examples directory don't work Ole defect normal Functionality and features
#128 okushiri validation fails Ole defect normal Testing and validation
#129 Developer installation guide. Ole defect normal Documentation
#130 Okushiri auto validation unit test broken on cyclone ole defect normal Testing and validation
#131 Fit to mesh take a lot longer than it used to duncan defect high Efficiency and optimisation
#132 set mean_stage after the sww boundary file is created. ole enhancement normal Efficiency and optimisation
#133 automatic validation only works on Nautilus Ole defect low Testing and validation
#134 Problem with URS data?, momentum or conversion problem duncan defect high Functionality and features
#135 Optimise compute_fluxes when quantities are equal on either side ole defect normal Efficiency and optimisation
#136 Allow max inundation level to apply to polygons only ole defect high Architecture and API
#137 test_caching crashes ole defect lowest Testing and validation
#138 one problem with caching rwilson defect normal Efficiency and optimisation
#139 Model seems to die with dampier runs on cyclone, using 8 processors duncan defect low Functionality and features
#140 I can't remember how to compile metis anonymous defect normal Appearance and visualisation
#141 Problem with parallel code in Field_boundary (Interpolation_function) duncan defect high Functionality and features
#142 small change in Data_manager that needs to be checked Duncan defect normal Functionality and features
#145 Forcing function implementing Culverts ole enhancement high Functionality and features
#146 unable to browse source via trac steve defect highest Management and planning
#147 Store min and max values of all quantities in sww file duncan enhancement normal Functionality and features
#148 problem with loading .pts file in Sri lanka duncan defect normal Functionality and features
#150 incorporate the Export_data.py script into anuga source anonymous enhancement normal Efficiency and optimisation
#151 incorporate the get_timeseries.py script into anuga source nick and jane enhancement low Efficiency and optimisation
#152 Add version info to sww files. nariman defect normal Architecture and API
#153 get_revision_number doesn't get revision # if executed with IDLE or emacs ole defect normal Functionality and features
#154 quantity.get_vertex_values is slow ole defect normal Efficiency and optimisation
#155 Error msg on Geospatial_data input duncan defect normal Functionality and features
#157 Export grid may fail if old sww files are around?? duncan defect lowest Appearance and visualisation
#159 Variable forcing functions ole enhancement low Appearance and visualisation
#160 "could not find triangle" crash when exporting a grid from parallel results duncan enhancement normal Functionality and features
#161 Group directory and file permissions not working correctly when using "mpirun" nick defect normal Management and planning
#162 Move test file used by test polygon into same directory as the test jane task low Appearance and visualisation
#163 Problem with export grid on tornado duncan defect normal Appearance and visualisation
#164 allow inundation_damage to work with multiple sww files duncan enhancement high Functionality and features
#165 "glibc detected" error in exmouth when ran in parallal ole defect high Functionality and features
#167 Trac is not sending duncan emails Ole defect normal Management and planning
#168 "could not find triangle" crash when exporting a grid from SERIAL results ole defect high Functionality and features
#169 export_grid doesn't throw an error if swwfile doesn't exist duncan defect normal Functionality and features
#170 Investigate further improvements on code management ole task low Management and planning
#171 test all on cyclone is creating large files and not finishing. Duncan defect high Testing and validation
#172 Compute Maximal Runup height from sww files. ole defect normal Functionality and features
#173 Time series plots have incorrect starttimes nick enhancement high Functionality and features
1 2 3 4 →
Note: See TracQuery for help on using queries.